Archive 1997–2024

Creative Lab's Nomad Muvo TX - Best of the micro MP3 players


Creative's Nomad Muvo TX - Interface (continued)

Since the Muvo TX can also be used as a voice recorder, there are two additional options in the main menu: "voice" and "record". Voice allows you to playback recordings, while the record function brings you to the active record screen.




Click to enlarge.




Click to enlarge.


The recording screen is straight forward. The play/pause/power button acts as the record button here as well as the command to stop. After a recording is stopped, the time remaining left to record is indicated in the lower portion of the screen.




Click to enlarge.


Power off is done automatically if in idle mode long enough. The default option is 3 minutes, but manual power off requires the user to hold down the play/pause button for a few seconds. At that point, a screen should appear indicating power off and a bar that is segmented into three parts. The longer you hold down the button, the more highlighted the bar becomes, and as soon as the bar is fully highlighted, the unit powers down.




Click to enlarge.




Click to enlarge.


By default, the backlight is set for 3 seconds, like the Muvo2; meaning, the backlight will stay lit for three seconds past the last point of activity. The brightness of the backlight seems to be of the exact same lumens as the Muvo2, but the backlight seems to be of more importance to the Muvo TX, since it helps separate the different contrasts more on the small screen.

Creative's Nomad Muvo TX – Interface Creative's Nomad Muvo TX – Windows Support

Originally published at https://www.anandtech.com/show/1332 (Wayback Machine).