The Biostar X470GTN Motherboard Review: AM4 ITX Revisited
System Performance
Not all motherboards are created equal. On the face of it, they should all perform the same and differ only in the functionality they provide - however, this is not the case. The obvious pointers are power consumption, but also the ability for the manufacturer to optimize USB speed, audio quality (based on audio codec), POST time and latency. This can come down to manufacturing process and prowess, so these are tested.
Power Consumption
Power consumption was tested on the system while in a single ASUS GTX 980 GPU configuration with a wall meter connected to the Thermaltake 1200W power supply. This power supply has ~75% efficiency > 50W, and 90%+ efficiency at 250W, suitable for both idle and multi-GPU loading. This method of power reading allows us to compare the power management of the UEFI and the board to supply components with power under load, and includes typical PSU losses due to efficiency. These are the real world values that consumers may expect from a typical system (minus the monitor) using this motherboard.
While this method for power measurement may not be ideal, and you feel these numbers are not representative due to the high wattage power supply being used (we use the same PSU to remain consistent over a series of reviews, and the fact that some boards on our test bed get tested with three or four high powered GPUs), the important point to take away is the relationship between the numbers. These boards are all under the same conditions, and thus the differences between them should be easy to spot.



The power consumption on the X470GTN was middle of the road, despite being smaller than the majority of the boards on test. The result under load roughly matches that of the X370GTN and matches the result give by the same sized ASRock B450 Gaming ITX/ac motherboard.
Non-UEFI POST Time
Different motherboards have different POST sequences before an operating system is initialized. A lot of this is dependent on the board itself, and POST boot time is determined by the controllers on board (and the sequence of how those extras are organized). As part of our testing, we look at the POST Boot Time using a stopwatch. This is the time from pressing the ON button on the computer to when Windows starts loading. (We discount Windows loading as it is highly variable given Windows specific features.)

The Biostar X470GTN currently holds the fastest non UEFI POST time within our testing by the skin of its teeth and provides a good showing both at default, and with controllers turned off within the BIOS. This marks a notable improvement over the times procured from our testing of Biostars own X370GTN.
Rightmark Audio Analyzer 6.2.5
Rightmark:AA indicates how well the sound system is built and isolated from electrical interference (either internally or externally). For this test we connect the Line Out to the Line In using a short six inch 3.5mm to 3.5mm high-quality jack, turn the OS speaker volume to 100%, and run the Rightmark default test suite at 192 kHz, 24-bit. The OS is tuned to 192 kHz/24-bit input and output, and the Line-In volume is adjusted until we have the best RMAA value in the mini-pretest. We look specifically at the Dynamic Range of the audio codec used on the rear panel of the board.

Our testing in RMAA fits with what we've experienced already with boards featuring a Realtek ALC892 HD audio codec. The testing indicates that it's notably better than the ALC887 in the dynamic range benchmark, but falls short of the performance outputted by the boards equipped with the more expensive and premium ALC1220 codec.
DPC Latency
Deferred Procedure Call latency is a way in which Windows handles interrupt servicing. In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority. Critical interrupts will be handled as soon as possible, whereas lesser priority requests such as audio will be further down the line. If the audio device requires data, it will have to wait until the request is processed before the buffer is filled.
If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time. This can lead to an empty audio buffer and characteristic audible pauses, pops and clicks. The DPC latency checker measures how much time is taken processing DPCs from driver invocation. The lower the value will result in better audio transfer at smaller buffer sizes. Results are measured in microseconds.

None of the boards on test have been optimized for DPC latency, but the Biostar X470GTN managed to again post the best result seen in some of our system benchmarking suites with a result that totally decimates the previous iteration of this same board, the X370GTN. To make sure there wasn't an anomaly, the test was run three times with two of three achieving a maximum latency of 87.8 microseconds.
Originally published at https://www.anandtech.com/show/13264/the-biostar-x470gtn-motherboard-review-am4-itx-revisited (Wayback Machine).