Archive 1997–2024

The GIGABYTE X399 DESIGNARE EX Motherboard Review

Board Features

GIGABYTE cleverly designed the X399 Designare EX motherboard to have  all the features that would cover the needs of virtually all users, yet the designer did not install any features of limited and/or questionable usefulness. This kept the price of the motherboard a little lower than the competition - GIGABYTE focused on the reliability of the motherboard, implementing virtually the most proven chipsets and enhancing the mechanical strength of the board itself. The price tag of $380 is reasonable for a top of the line motherboard for a Ryzen Threadripper, placing GIGABYTE's offering about $50 lower than its direct competition.

GIGABYTE X399 Designare EX
Warranty Period 3 Years
Product Page Link
Price Link
Size ATX
CPU Interface TR4 / SP3r2
Chipset AMD X399
Memory Slots (DDR4) Eight DDR4
Supporting 128GB
Dual Channel
Up to 3600+ MHz
Video Outputs N/A
Network Connectivity 2 x Intel I211-V
1 x Intel 802.11ac
Onboard Audio Realtek ALC1220A
PCIe Slots for Graphics (from CPU) 4 × PCIe 3.0 (×16 / ×8 / ×16 / ×8)
PCIe Slots for Other (from PCH) 1 × PCIe 3.0 (×4)
Onboard SATA Eight, RAID 0/1/5/10
Onboard SATA Express None
Onboard M.2 3 × PCIe 3.0 (x4)
Onboard U.2 None (adapter included)
USB 3.1 Gen 2 1 × Type-C
1 × Type-A
USB 3.1 Gen 1 8 × Type-A Rear Panel
2 × Type-A via headers
1 × Type-C via headers
USB 2.0 4 × via headers
Power Connectors 1 x 24-pin ATX
1 x 8-pin CPU
1 x 4-pin CPU
Fan Headers 1 x CPU (4-pin)
1 x Pump/Aux (4-pin)
6 x System (4-pin), two support liquid-cooling pumps
IO Panel 8 x USB 3.0 (USB 3.1 Gen 1)
1 x USB 3.1 Type-A
1 x USB 3.1 Type-C
2 x Network RJ-45
2 x MMCX antenna connectors (2T2R)
1 x Combo PS/2
5 x 3.5 mm Audio Jacks
1 x Optical SPDIF Out Port

In The Box

We get the following:

  • Driver Disk
  • Quick Installation Guide
  • User's manual
  • Sheet with numerous stickers and cable labels
  • M.2 to U.2 adapter
  • Six black SATA cables (three straight, three with a 90° connector)
  • Two thermocouples
  • Two cable straps
  • SLI/Crossfire bridge (Two GPUs)
  • Torx key for the CPU socket
  • RGB strip cables
  • Wireless antenna
  • Case connector quick plug

The bundle of the X399 Designare EX is good for a motherboard of this class. Note that the metallic I/O shield appears to have been omitted in the picture but the motherboard actually comes with it pre-attached. Inside the box we found a comprehensive manual and a quick installation guide, six SATA cables, two RGB strip cables, a Torx key for the CPU socket, a WiFi/Bluetooth antenna, and a dual GPU bridge. Strangely, no bridges for triple and/or quad SLI/Crossfire configurations are included. GIGABYTE also supplies a M.2 to U.2 adapter, two cable straps, and a sheet with numerous stickers and wire labels. Finally, there are two simple K-type thermocouples included that can be connected to the corresponding motherboard pins and monitor the temperature of anything they get attached to. Aside from the SLI/Crossfire bridges, we feel that the bundle is quite complete, yet we would like to see GIGABYTE ditching the DVDs for flash media, as many users nowadays do not even install an optical drive at all.

Originally published at https://www.anandtech.com/show/13001/the-gigabyte-x399-designare-ex-motherboard-review (Wayback Machine).