Lian Li's PC-6070 Aluminum Case
- Posted in
- Cases/Cooling/PSUs
Installation
Installation of all the necessary components ate up about 20 minutes for the PC-6070. The biggest time consumer was because of the design of the drive bays as well as the motherboard. Drive rails and sliding clips are beginning to be standardized on many newer cases, yet Lian Li chose not to go with a completely screw-less design. One reason why this may be for the drive mounts is safety. Hard drives need to be mounted securely in order to work efficiently; otherwise, they may become damaged.Add-on cards used thumbscrews, which saved some time in that area. It is a step forward from the traditional Philips head screws, but again, screw-less designs are dominating the industry.
The power supply installed flawlessly using screws from the back. One thing to keep in mind is while using a large CPU heatsink, the motherboard tray may need to be removed to install a power supply easily; otherwise, it is almost impossible to get a unit inside.
Originally published at https://www.anandtech.com/show/1278 (Wayback Machine).
