Archive 1997–2024

Lian Li's PC-6070 Aluminum Case


Motherboard Tray

The motherboard tray is designed to allow the removal of an installed system board along with the add-on cards plugged into it. This one piece design saves time and is being seen in more and more new cases, like the Kingwin KT-436 that we reviewed back in November 2002.



Click to enlarge.


To install a motherboard, the included "mounting nut" need to be pushed in from the backside of the tray in the many square cut outs. Though installations of these nuts are tedious, they seldom need to be removed if working with motherboards of the same form factor. The motherboard can then be screwed into place using the motherboard screws provided. There are more than enough cut outs to allow a variety of form factors to be used. We thought Thermaltake's method of using screw-less stand-offs saved a great amount of time during installation of the motherboard; just something for Lian Li to think about for future designs.



Click to enlarge.


Originally published at https://www.anandtech.com/show/1278 (Wayback Machine).