Thermaltake's Xaser III Skull Series - A Case For the Tough Guy
- Posted in
- Cases/Cooling/PSUs
Benchmarking
We have a few heat and sound intensive tests lined up for the ThermalTake Xaser III Skull. The Heatsink reading is actually the temperature inside the heatsink. CPU temperature is recorded as a separate measurement. All temperature is recorded in degrees Celsius. The heat tests were each performed inside the closed case with the external temperature of 24.0 degrees Celsius, during a full system load. The fan speeds on the rheobus were all placed on high. Our test bed consisted of:Gigabyte GA-7VRX |
|
The thermal readings for the different components during operation were as follows:
| System On-Time | CPU | Heatsink | HDD | DDR | Northbridge | Southbridge | Power Supply | System Ambient |
| 10 | 52.1 | 37.3 | 28.9 | 34.2 | 39.2 | 39.1 | 29.4 | 29.9 |
| 30 | 53.4 | 38.9 | 29.7 | 36.6 | 40.4 | 39.9 | 31.6 | 30.4 |
Another important number when it comes to system cases is the noise level. A good case will have a very low decibel level on the outside. The ambient noise level was at about 51 dBA with the power supply fan disabled. We measured noise levels of the case combined with this ambient noise level 12" away from the case. Provided in the table are noise readings of cases that we have reviewed in the past.
| Case | dBA |
| Thermaltake Xaser III VM3000A - Skull | 55 |
| Kingwin KT-424 Aluminum | 55 |
| Thermaltake Xaser III Aluminum Fan Low | 52 |
| Cooler Master ATC-201A Aluminum | 53 |
| Kingwin KT-436-BK-WM Aluminum | 50 |
The 4 case fans seemed to increase the noise levels inside the case, but could barely be heard when the VM3000A was sealed. Though the included fans were extremely quiet, the CPU fan that we used boosted the noise level about 15 dBA. The motherboard was disconnected to allow us to measure the true ambient noise level inside the case.
Originally published at https://www.anandtech.com/show/1264 (Wayback Machine).
