Archive 1997–2024

Socket 940 Roundup: Motherboards for the Athlon64 FX


Asus SK8N: Stress Testing

We performed stress tests on the Asus SK8N in these areas and configurations:

1. Chipset and motherboard stress testing, conducted by running the FSB at 213MHz at default voltage. We also ran a few stability tests at the highest overclock of 2452GHz at 1.65V.
2. Memory stress testing, conducted by running the Registered ECC Memory at 400MHz with 2 Dual-Channel (1 bank) DIMM slots filled, and at 400MHz with all 4 Dual-Channel (2 bank) DIMM slots filled at the lowest memory timings possible with Mushkin Registered ECC 3200 memory. Since the Athlon64 FX does not require ECC for proper operation, all memory tests were run with ECC disabled.

Front Side Bus Stress Test Results:

We ran a full range of stress tests and benchmarks to ensure that the Asus SK8N was absolutely stable at the overclocked speed at default voltage. This included Prime95 torture tests, and the addition of other tasks — data compression, various DX8 and DX9 games, and apps like Word and Excel — while Prime95 was running in the background. At default voltage, 213MHz was the highest overclock that we were able to achieve; 2452MHz was the highest overclock that we could achieve by raising the CPU voltage or Hammer VID to 1.65V.

Memory Stress Test Results:

This memory stress test is very basic, as it simply tests the ability of the SK8N to operate at its officially supported memory frequency (400MHz DDR) at the lowest supported memory timings that our Mushkin High Performance ECC Registered Modules will support. The Registered Modules were run at SPD timings:


Stable DDR400 Timings — 2 DIMMs
2/4 DIMMs populated — 1 DC bank
Clock Speed: 200MHz
Timing Mode: 128-bit DC
CAS Latency: 2.0
Bank Interleave: N/A
RAS to CAS Delay: 3T
RAS Precharge: 6T
Precharge Delay: 2T
Command Rate: Auto
ECC: Disabled

We had no problem running 2 DS 512MB DIMMs of our standard Mushkin ECC Registered in the SK8N at the aggressive SPD timings at default memory voltage.

Filling all available memory banks is more strenuous on the memory subsystem than testing 2 DIMMs, but we had no problem at all running with all 4 matching DIMMs installed providing 2 Dual-Channel Banks.


Stable DDR400 Timings — 4 DIMMs
4/4 DIMMs populated — 2 DC bank
Clock Speed: 200MHz
Timing Mode: 128-bit DC
CAS Latency: 2.0
Bank Interleave: N/A
RAS to CAS Delay: 3T
RAS Precharge: 6T
Precharge Delay: 2T
Command Rate: Auto
ECC: Disabled

The required memory timings with 4 DIMMs were the same as 2 DIMMs, the fastest 2-2-3-6 SPD timings of the Mushkin Registered memory. No memory voltage increase was required for stability as the SK8N was stable at default memory voltage with 4 DIMMs.

Prime95 torture tests were successfully run at the timings listed in the above charts. We also ran ScienceMark (memory tests only) and Super Pi. None of the three stress tests created any stability problems for the Asus SK8N at these memory timings and standard memory voltage.

Originally published at https://www.anandtech.com/show/1210 (Wayback Machine).