Socket 940 Roundup: Motherboards for the Athlon64 FX
- Posted in
- Motherboards
Asus SK8N: BIOS and Overclocking
BIOS

Asus uses AMI BIOS on almost all of their current boards, including the SK8N. Major categories are across the top and each category has many submenus.

Most of the adjustment options that we normally use are in the Advanced section, which includes Northbridge Configuration, Southbridge Configuration, AGP Configuration, and HyperTransport Configuration.

While the SK8N has a reorganized BIOS to improve understanding, even the 1004 BIOS for the SK8N still uses an arrangement that can be confusing. Adjustments for multipliers and voltage are under “Advanced” in the “AMD FID/VID Configuration” sub-menu.

While there is an overall CPU voltage adjustment in another menu, the fine tuning is done in the “Hammer VID” submenu.
Multipliers can be adjusted in the “Hammer FID” submenu. A wide range from 4 to 20 is available with half multipliers. As already mentioned, Asus has reworked the arrangement and descriptions in the SK8V BIOS that we will be examining later. Unfortunately, the SK8N arrangement is just as obscure as ever.

Adjustments for memory are under “Advanced”, “Northbridge Chipset Configuration”. Once you locate them, you will find a complete range of memory timing adjustments, but a limited vDIMM range to 2.7V.

PC Health information is very complete, and can be found under the Power Menu, “Hardware Monitor” submenu. You will find system temperatures, fan speeds, and voltages. There are also controls for the Asus Q-fan utility, which enables fan speeds to be controlled by temperature.
FSB Overclocking Results
We have not found the Athlon64 FX to be a particularly good overclocker, which is not a surprise for a new top-line processor. However, with the recent Asus SK8N BIOS updates, we were able to squeeze more from the FX than we have seen in the past.| Front Side Bus Overclocking Testbed | ||
| Default Voltage | Maximum Overclock | |
| Processor: | Athlon64 FX51 2.2GHz |
Athlon64 FX51 2.2Ghz |
| CPU Voltage: | 1.5V (default) | 1.65V |
| Cooling: | Cooler Master Silent K8 Heatsink/Fan | Cooler Master Silent K8 Heatsink/Fan |
| Power Supply: | Enermax 465W | Enermax 465W |
| Maximum OC: | 2346MHz (+6.6%) 11x213 |
2452MHz (+11.5%) 12x204 |
The above overclocking setup at default voltage allowed us to reach the highest stable setting of 213 (852 HT). The highest MHz speed achieved was at 12x204 or 2452MHz at 1.65V. Higher overclocks may be possible at higher voltages, but we were not comfortable running greater than 10% voltage increase with air cooling.
The SK8N, particularly with the 1004 BIOS, has the tools needed to overclock an FX processor effectively. The only adjustment that is a bit lacking is memory voltage or vDIMM, which only allows adjustment to 2.7V. This is less of an issue with Registered memory than it might be with standard unbuffered DDR, where many high-end manufacturers are now certifying performance to 3.0V.
Originally published at https://www.anandtech.com/show/1210 (Wayback Machine).