Archive 1997–2024

Intel's E7205: Granite Bay Hits the Streets

ASUS P4G8X Deluxe: Stress Testing

The P4G8X had some pretty decent stress testing potential, mostly because it's based on a dual channel chipset (E7205), which is a more complex and difficult chipset to implement (due to signal integrity, among other issues) than the conventional single channel DDR chipsets that dominate today's markets. Still, we managed to test this board in several different areas and configurations, including:

  1. Chipset and motherboard stress testing was conducted by running the FSB at 160MHz.
  2. Memory stress testing was conducted by running RAM at 266MHz and 320MHz in dual DDR operation (two modules each) at the most aggressive timings possible.

Front Side Bus Stress Test Results:

Our FSB stress tests at 160MHz proved to be completely successful. Prime95 torture tests were run in the background for a grand total of 30 hours straight, during which time we performed some general tasks like data compression, various DX8 games (JKII, etc.), and light apps like Word and Excel. We also decided to further stress the P4G8X by randomly rerunning SPECviewperf 7.0, Sciencemark, and XMPEG, all of which couldn't faze the P4G8X.

Memory Stress Test Results:

Our first memory stress test tests how well the P4G8X is able to handle the stock, rated speed the Intel E7205 chipset is validated for (namely dual DDR266 operation). Here were the timings we were able to achieve at the following settings:

Stable DDR266 Timings
(2/4 banks populated)

Clock Speed:
133MHz
Timing Mode:
Turbo
CAS Latency:
2
Bank Interleave:
N/A
Precharge to Active:
2T
Active to Precharge:
5T
Active to CMD:
2T
Command Rate:
N/A

These are exactly the timings you want to see in a truly good dual channel motherboard. You won't be able to squeeze any more performance from your memory with these timings, as there aren't any other BIOS options that would increase performance.

Since the P4G8X doesn't have any other memory dividers other than 1:1, we decided to test how aggressive we could set DRAM timings to running at dual DDR320 (160MHz FSB). Here were our results:

Stable DDR320 Timings
(2/4 banks populated)

Clock Speed:
160MHz
Timing Mode:
Turbo
CAS Latency:
2
Bank Interleave:
N/A
Precharge to Active:
2T
Active to Precharge:
5T
Active to CMD:
2T
Command Rate:
N/A

We see that the P4G8X is able to handle the same aggressive timings at DDR320 as it did at DDR266. Very impressive, but we have to admit, it isn't anything we haven't seen before from dual DDR nForce boards. Still, it's nothing to complain about.

Our final memory test deals with one of the more stressful situations we can think of with the P4G8X. Lets see what happens with all four memory slots full running at 266MHz:

Stable DDR266 Timings
(4/4 banks populated)

Clock Speed:
133MHz
Timing Mode:
Turbo
CAS Latency:
2
Bank Interleave:
N/A
Precharge to Active:
2T
Active to Precharge:
5T
Active to CMD:
2T
Command Rate:
N/A

 

This is exactly what we like to see. With all four memory banks populated, CAS 2-2-2-5 in Turbo mode is very possible. We used four identical Corsair XMS modules (rated at CAS2 DDR400) for this test. However, mixing memory modules with all four DIMMs populated isn't impossible by any means. With two Corsair XMS modules and two Mushkin modules installed, we were able to just as reliably operate the P4G8X as we were with identical Corsair modules.

As usual, we ran several memory stress tests and general apps to make sure all these timings were stable. We started off by running Prime95 torture tests; a grand total of 24 hours of Prime95 was successfully run at the timings listed in the above charts. We also ran Sciencemark (memory tests only) and Super Pi. Neither stress test was able to bring the P4G8X to its knees.

Originally published at https://www.anandtech.com/show/1033 (Wayback Machine).