Archive 1997–2024

Intel's E7205: Granite Bay Hits the Streets

Tyan S2662: Basic Features

Motherboard Specifications

CPU Interface
Socket-478
Chipset
Intel E7205 MCH
Intel 82801DB ICH4
Bus Speeds
N/A
Core Voltages Supported
N/A
I/O Voltages Supported
N/A
DRAM Voltages Supported
N/A
Memory Slots
4 184-pin DDR DIMM Slots
Expansion Slots
1 AGP 8X Slot
5 PCI Slots
Onboard RAID
N/A
Onboard USB 2.0/IEEE-1394
USB 2.0 supported through South Bridge
No FireWire
Onboard LAN
Intel RC82540EM Gigabit LAN
Onboard Audio
Analog Devices AD1981A SoundMAX
Onboard Serial ATA
N/A
BIOS Revision
0.26.662

As is apparent from the motherboard specs listed in the above table, the Tyan S2662 is a very plain, no-nonsense motherboard for the most part.

Tyan chooses the same Gigabit chip that Gigabyte uses for their E7205 motherboard, namely RC82540EM Gigabit LAN chip. This chip supports up to1000Mbit/s bandwidth. We had no trouble setting up a LAN with this particular chip, as was the case with MSI and Gigabyte's implementation.

For onboard sound, the Tyan S2662 chooses Analog Devices' AD1981A SoundMAX chip. There really isn't anything terribly interesting to say about this sound device, expect that it is obviously AC '97 2.2 compliant. For more information on the AD1981A SoundMAX chip, head on over to this link http://products.analog.com/products/info.asp?product=AD1981A.

The S2662's I/O configuration is pretty bland, similar to Gigabyte and ASUS's I/O configurations. The S2662 features two PS/2 ports, two serial ports, one parallel port, two rear USB 2.0 ports, a Gigabit LAN port, and Mic In, Line In, and Line Out, which drive the onboard AD1981A SoundMAX chip.

The S2662's only IDE support comes in the form of two IDE connectors, the Primary and Secondary IDE connectors. Both these connectors support two channels each, for a total of four IDE devices max. There is no RAID (Serial ATA or IDE RAID) included on this motherboard, and therefore there are no other connectors for you to expand your possibilities beyond four IDE devices. If you feel that, for example, a couple optical drives and hard drives adequately fit your needs, you have nothing to worry about in terms of the S2662's IDE support. But if you want RAID or more device support you should look elsewhere.

As usual, USB 2.0 support is powered by Intel's ICH4 South Bridge. So, in total, you're able to use no more than six USB ports at a time on the S2662. We did not see any USB bracket(s) included with our motherboard, but we're not 100% certain if Tyan will be including USB 2.0 compliant brackets with their shipping S2662 motherboards, so our accessory package may not be complete. For your reference, we received a manual, driver CD, and two IDE cables plus a Floppy cable with our Tyan S2662 motherboard. Unfortunately, this board did not come with onboard FireWire as well.

Originally published at https://www.anandtech.com/show/1033 (Wayback Machine).