Archive 1997–2024

Intel's E7205: Granite Bay Hits the Streets

Gigabyte 8INXP: Stress Testing

The 8INXP had some pretty decent stress testing potential, mostly because it's based on a dual channel chipset (E7205), which is a more complex and difficult chipset to implement (due to signal integrity, among other issues) than the conventional single channel DDR chipsets that dominate today's markets. Still, we managed to test this board in several different areas and configurations, including:

  1. Chipset and motherboard stress testing was conducted by running the FSB at 163MHz.
  2. Memory stress testing was conducted by running RAM at 266MHz and 326MHz in dual DDR operation (two modules each) at the most aggressive timings possible.

Front Side Bus Stress Test Results:

While we were certainly happy that the 8INXP ended up being the best overclocker out of all the Granite Bay boards, we had to make absolutely sure that overclock wasn't a fluke (though our stress tests are hardly an indication of long term stability/reliability, which is near impossible to accurately measure without massive resources). We still ran our usual array of stress tests, including Prime95 torture tests, which were run in the background for a total of 24 hours. With Prime95 running in the background, we ran lots of other tasks such as data compression, various DX8 games, and light apps like Word and Excel. We reran our entire benchmark suite this time around, which includes Sysmark 2002, Quake3 Arena, Jedi Knight II, Unreal Tournament 2003, SPECviewperf 7.0, Sciencemark, and XMPEG.

All in all, the 8INXP was able to pass all of our stress tests at 163MHz FSB (Dual DDR326) with flying colors.

Memory Stress Test Results:

This first memory stress test deals with how well the Gigabyte 8INXP can handle dual DDR266. Here were the timings we were able to achieve:

Stable Dual DDR266 Timings
(2/4 banks populated)

Clock Speed:
133MHz
Timing Mode:
N/A
CAS Latency:
2
Bank Interleave:
N/A
Precharge to Active:
2T
Active to Precharge:
5T
Active to CMD:
2T
Command Rate:
N/A

These are, obviously, very good timings. What isn't shown in this graph however is that we were allowed to enable "Top Performance" in the BIOS. This speeds up the 8INXP considerably, by about 5% or so in most of our benchmarks. However, you should know that you must first load the optimized defaults in the BIOS, as this yields the most reliable and fastest results.

E7205 motherboards don't have any other memory dividers other than 1:1, so there's no way we can run memory higher than 266MHz without overclocking the FSB. Well, in this next scenario, that's exactly what we decided to do. Here were our DRAM timing results at 163MHz FSB (326MHz memory):

Stable Dual DDR326 Timings
(2/4 banks populated)

Clock Speed:
163MHz
Timing Mode:
N/A
CAS Latency:
2
Bank Interleave:
N/A
Precharge to Active:
2T
Active to Precharge:
5T
Active to CMD:
2T
Command Rate:
N/A

These are excellent timings for a chipset that isn't validated for as high as dual DDR326. Just as before, these timings were achieved with Top Performance enabled in the BIOS.

Our next memory stress tests included running 4 DIMMs at 266MHz. Here were the timings we were able to achieve:

Stable Dual DDR266 Timings
(4/4 banks populated)

Clock Speed:
133MHz
Timing Mode:
N/A
CAS Latency:
2
Bank Interleave:
N/A
Precharge to Active:
2T
Active to Precharge:
5T
Active to CMD:
2T
Command Rate:
N/A

These are excellent DRAM timings considering how many modules are installed. Due to time constraints, we were unable to test how far memory could overclock with all four DIMM slots populated. If it's any consolation, we'll be sure to include this test in our future E7205 reviews.

As usual, we ran several memory stress tests and general apps to make sure these timings were stable. We started off by running Prime95 torture tests; a grand total of 24 hours of Prime95 was successfully run at the timings and speeds listed in the above charts. We also ran Sciencemark (memory tests only) and Super Pi tests successfully. These are the exact same tests we ran on the ASUS P4G8X. All in all, we're quite happy with the outcomes.

Originally published at https://www.anandtech.com/show/1033 (Wayback Machine).