Archive 1997–2024

The ADATA Premier SP550 SSD Review: A Second Look At Silicon Motion's SM2256 Controller

Sequential Read Performance

The sequential read test requests 128kB blocks and tests queue depths ranging from 1 to 32. The queue depth is doubled every three minutes, for a total test duration of 18 minutes. The test spans the entire drive, and the drive is filled before the test begins. The primary score we report is an average of performances at queue depths 1, 2 and 4, as client usage typically consists mostly of low queue depth operations.

Iometer - 128KB Sequential Read

The sequential read speed of the SP550 places it in the second tier, but there's nothing to complain about.

Iometer - 128KB Sequential Read (Power)

Power consumption during sequential reads is not quite low enough for the SP550 to compete against the best MLC-based drives, but its efficiency is otherwise pretty good.

The SP550's sequential read performance saturates by the time queue depth reaches 4 and is close at QD2. This drive isn't quite the fastest to reach its limit, but it's still easy to get full performance from it. The only real flaw here is the relatively low QD1 performance.

Sequential Write Performance

The sequential write test writes 128kB blocks and tests queue depths ranging from 1 to 32. The queue depth is doubled every three minutes, for a total test duration of 18 minutes. The test spans the entire drive, and the drive is filled before the test begins. The primary score we report is an average of performances at queue depths 1, 2 and 4, as client usage typically consists mostly of low queue depth operations.

Iometer - 128KB Sequential Write

As with the random write performance, the sequential write performance is very low. At this point even a good mechanical hard drive would be much faster, though several other TLC drives and some smaller MLC drives also fall below that threshold.

Iometer - 128KB Sequential Write (Power)

Power consumption is almost halved relative to the Crucial BX200, but that's still not enough for the SP550's efficiency on this test to be considered good.

Performance and power consumption are slightly better at QD1 as the SP550 gets to burn through its SLC cache at the beginning of the test, but after that there's no scaling with queue depth.

Originally published at https://www.anandtech.com/show/10131/the-adata-premier-sp550-ssd-review (Wayback Machine).