Archive 1997–2024

The SilverStone SX600-G SFX PSU Review

Cold Test Results

For the testing of PSUs, we are using high precision electronic loads with a maximum power draw of 2700 Watts, a Rigol DS5042M  40 MHz oscilloscope, an Extech 380803 power analyzer, two high precision UNI-T UT-325 digital thermometers, an Extech HD600 SPL meter, a self-designed hotbox and various other bits and parts. For a thorough explanation of our testing methodology and more details on our equipment, please refer to our How We Test PSUs - 2014 Pipeline post.

The efficiency of the SilverStone SX600-G is very good but it does not actually meet the 80Plus Gold certification standards under 230V AC input. It is very likely that it does with an input of 110V/60Hz AC, which admittedly is what was used to certify this PSU in the first place. We measured a maximum efficiency of 91.2% at 50% load and an average efficiency across the entire nominal load range (20% to 100% of the unit's capacity) of 89.2%. It is interesting to note that the low load efficiency of the SX600-G is quite good, with an efficiency reading of nearly 79% at just 5% load.

This PSU sports a semi-fanless design, meaning that the fan will start only after the temperature exceeds a certain point. For a densely packed SFX unit, that point as it turns out is not very high, with the fan kicking in shortly after 200W in our room temperature environmental test. Still, the internal temperatures of the SX600-G remained relatively low and the fan did not have to get loud. Even at maximum load, the fan stopped at 39.1 dB(A), a clearly audible but borderline comfortable figure. 

Originally published at https://www.anandtech.com/show/9549/the-silverstone-sx600g-sfx-psu-review (Wayback Machine).