Archive 1997–2024

ADATA XPG SX930 (120GB, 240GB & 480GB) SSD Review: JMicron JMF670H Debuts

Sequential Read Performance

For full details of how we conduct our Iometer tests, please refer to this article.

Iometer - 128KB Sequential Read

Sequential read performance is surprisingly marked down. While we are only talking about a 10-20% difference, given the longevity of the push towards sequential data rates, I wouldn't expect any modern controller to have trouble with sequential read performance anymore. 

Iometer - 128KB Sequential Read (Power)

Power is also low, though, resulting in efficient, yet a bit low performance. 

ADATA XPG SX930

The reason for the poor sequential read performance lies in very poor performance scaling. Typically all modern drives reach ~550MB/s at QD2, but the JMF670H requires QD8 to reach its maximum performance. This has a knock on effect for any non-prosumer or gaming scenario which is where the SX930 series is aimed at.

Sequential Write Performance

Iometer - 128KB Sequential Write

Sequential write performance is a bit better and here the SX930 is a quite average drive, although the 480GB model should again be faster since it's slightly behind its competitors. 

Iometer - 128KB Sequential Write (Power)

Scaling with queue depth is minimal, which is normal for low capacity drives but at 240GB and 480GB there should be enough NAND bandwidth available for higher throughput which we don't see here, perhaps indicating some of the limitations of the controller. 

ADATA XPG SX930

Originally published at https://www.anandtech.com/show/9433/adata-xpg-sx930-120gb-240gb-480gb-ssd-review (Wayback Machine).