The Corsair CS450M PSU Review
Cold Test Results
For the testing of PSUs, we are using high precision electronic loads with a maximum power draw of 2700 Watts, a Rigol DS5042M 40 MHz oscilloscope, an Extech 380803 power analyzer, two high precision UNI-T UT-325 digital thermometers, an Extech HD600 SPL meter, a self-designed hotbox and various other bits and parts. For a thorough explanation of our testing methodology and more details on our equipment, please refer to our How We Test PSUs - 2014 Pipeline post.
The Corsair CM450M makes a borderline pass through our efficiency test, just meeting the standards required for 80Plus Gold certification. The energy conversion efficiency reaches 92.1% at 50% load. An average conversion efficiency of 90.2% is achieved within the nominal load range (20% to 100% of the unit's capacity). It seemingly does not perform very well at very low loads, with a conversion efficiency of just 76.1% at 5% load. That however corresponds to an actual load of just 23 Watts and more powerful units would likely fare far worse at so low a load. With a load of 45 Watts, a fairly reasonable figure for the idling state of an average home PC, the conversion efficiency jumps to 83.5%.
As the power output of the CM450M is low and the conversion efficiency is high, it does not have high cooling requirements. Our testing results are not surprising, as the little 450W PSU maintains very low operating temperatures even when heavily loaded. The cooling fan does remain inaudible across most of the load range but it increases its speed at higher loads, reaching audible (but not intrusive) figures.
Originally published at https://www.anandtech.com/show/9343/the-corsair-cs450m-psu-review (Wayback Machine).




