Crucial MX200 (250GB, 500GB & 1TB) SSD Review
- Posted in
- Storage
- SSDs
- Crucial
- MX200
- Micron 16nm
Sequential Read Performance
For full details of how we conduct our Iometer tests, please refer to this article.

Sequential read performance hasn't been a strength of Crucial's Marvell based SSDs and the MX200 doesn't change that.

Power efficiency isn't too good either because the performance is low, yet the power draw is quite average.
![]() |
|||||||||
The scaling graph reveals why: the performance at QD1 and QD2 is simply terrible compared to other drives. Most drives max out the SATA 6Gbps interface at QD2 by providing over 500MB/s, but the MX200 requires QD4 before it reaches its full potential.
Sequential Write Performance

Fortunately sequential write performance is much better. The 250GB does leave a bit to be desired with its SLC cache, but compared to competing drive in the same capacity class it does well.

Power efficiency is also decent.
![]() |
|||||||||
Again the full SLC cache shows its impact, but now the slowdown starts at QD2 already (sequential writes are faster than random, so the cache is filled quicker). The larger capacities scale well and reach their maximum throughput at QD2.
Originally published at https://www.anandtech.com/show/9258/crucial-mx200-250gb-500gb-1tb-ssd-review (Wayback Machine).

