The Andyson Platinum R 1200W PSU Review
Hot Test Results
As the following tables indicate, Andyson really outdid themselves. The Platinum R 1200W displays exceptional power quality, especially considering the very high power output of the PSU. The maximum voltage ripple on the 12V line is just 26mV at maximum load, under a massive >92A current. The voltage regulation is equally amazing, with a change of less than 0.6% for every voltage line across the load range.
| Main Output | ||||||||
| Load (Watts) | 241.65 W | 603.17 W | 903 W | 1201.18 W | ||||
| Load (Percent) | 20.14% | 50.26% | 75.25% | 100.1% | ||||
| Line | Amperes | Volts | Amperes | Volts | Amperes | Volts | Amperes | Volts |
| 3.3 V | 1.87 | 3.37 | 4.68 | 3.37 | 7.01 | 3.35 | 9.35 | 3.35 |
| 5 V | 1.87 | 5.09 | 4.68 | 5.09 | 7.01 | 5.08 | 9.35 | 5.08 |
| 12 V | 18.71 | 12.07 | 46.77 | 12.05 | 70.15 | 12.03 | 93.53 | 12 |
| Line | Regulation (20% to 100% load) |
Voltage Ripple (mV) | |||||
| 20% Load |
50% Load |
75% Load |
100% Load |
CL1 12V |
CL2 3.3V + 5V |
||
| 3.3V | 0.4% | 4 | 4 | 10 | 16 | 6 | 10 |
| 5V | 0.2% | 4 | 6 | 12 | 16 | 6 | 10 |
| 12V | 0.6% | 6 | 10 | 18 | 26 | 20 | 12 |
We should mention that this PSU does not have a clear temperature rating. This most likely means that it has been rated at 40°C, as this is the commercial computer PSU temperature standard. However, in order to match the 50°C rating of several high-end products, we perform our testing at temperatures higher than 45°C. We could reduce the ambient temperature of our hotbox testing but we chose not to do so as the results would then not be comparable to those of our previous reviews.
According to the following results, it does not seem that Andyson would have any trouble giving this PSU a clear power output rating at 50°C. High ambient temperatures have very little to no effect on the performance of the Platinum R 1200W, which lost a mere 0.15% of its average energy conversion efficiency. In fact, it maintains the 80Plus Platinum efficiency levels, with the maximum efficiency being 94.1% at 40% load.
Despite the great rise of the ambient temperature, the internal temperatures of the PSU do not rise disproportionally. On the contrary, the rise is almost additive, with the internal temperatures of the PSU rising about as much as the ambient temperature did. The fan displays the same behavior, with the only difference being that its speed starts increasing much sooner, yet reaching the same maximum noise levels nonetheless.
Originally published at https://www.anandtech.com/show/9169/the-andyson-platinum-r-1200w-psu-review (Wayback Machine).




