Archive 1997–2024

GIGABYTE Server MD60-SC0 Motherboard Review: Haswell-EP with QSFP

GIGABYTE Server MD60-SC0 Conclusion

The MD60-SC0 has a clear market - air directed servers that prioritize CPU performance and storage over serious GPU compute, as the latter is only possible with PCIe riser configurations. Due to the orientation for the sockets, the use of narrow sockets and the SSI EEB form factor, it's use as a workstation board for OEMs or as a DIY board for home use is most likely limited unless they are already geared up for this scenario.

As always with GIGABYTE Server motherboards, most of the extra controls in place are via the Aspeed management console with access via the network interface. The BIOS and software bundled with the system is basic at best, especially when or if a user wants to control the fan speeds depending on workload. That being said, the management console will be familiar to those with experience in this field.

For those more used to consumer type products, it might sound odd for a motherboard manufacturer to include ports on the board that are only enabled when an add-in card is used. The MD60-SC0 does this by supporting a raid card via the Type-T mezzanine connector to power the SAS ports beside it. This does have some usefulness by allowing users to decide which RAID card is relevant, allowing an upgrade without much fuss, although the card GIGABYTE recommends revolves around the LSI SAS 2308 chip. It is worth noting that this card gets very hot to touch without airflow.

With respect to the system benchmarks, as per usual with management controlled server motherboards, the initial power on to turn on time is over 30 seconds. POST times were significantly cut if there is no use for some of the extra controllers or the raid card connectors. DPC latency was a little obscure, with the motherboard preferring the 2697 V3 processors over the other models we had at hand.

As this is our first LGA2011-3 dual socket motherboard review, it is a little difficult to place the benefits against the competition beyond the big obvious checkbox of QSFP. GIGABYTEServer's range of motherboards at launch afforded several models, a few focused on workstation but mostly for rack servers. The MD60-SC0 falls into the latter category, especially with this network configuration, and it ran most of our benchmark suite without issue. The main selling point of the motherboard will be that QSFP port.

Originally published at https://www.anandtech.com/show/8761/gigabyte-server-md60-sc0-motherboard-review-haswell-ep-with-qsfp (Wayback Machine).