GIGABYTE Server MD60-SC0 Motherboard Review: Haswell-EP with QSFP
System Benchmarks
Power Consumption
Power consumption is normally tested on the system while in a single MSI GTX 770 Lightning GPU configuration with a wall meter connected to the OCZ 1250W power supply, however for this review due to the PCIe arrangement we had an R7 240 equipped. This power supply is Gold rated, and as I am in the UK on a 230-240 V supply, leads to ~75% efficiency > 50W, and 90%+ efficiency at 250W, suitable for both idle and multi-GPU loading. This method of power reading allows us to compare the power management of the UEFI and the board to supply components with power under load, and includes typical PSU losses due to efficiency. These are the real world values that consumers may expect from a typical system (minus the monitor) using this motherboard.
While this method for power measurement may not be ideal, and you feel these numbers are not representative due to the high wattage power supply being used (we use the same PSU to remain consistent over a series of reviews, and the fact that some boards on our test bed get tested with three or four high powered GPUs), the important point to take away is the relationship between the numbers. These boards are all under the same conditions, and thus the differences between them should be easy to spot.



Having two processors installed doesn't take much more power at idle than our i7-5960X X99 counterparts, but when the CPU load starts to flow, the obvious differences arise. Interestingly the dual 65W combination for the E5 2650L v3 CPUs used less power than a single 130W CPU.
Windows 7 POST Time
Different motherboards have different POST sequences before an operating system is initialized. A lot of this is dependent on the board itself, and POST boot time is determined by the controllers on board (and the sequence of how those extras are organized). As part of our testing, we look at the POST Boot Time using a stopwatch. This is the time from pressing the ON button on the computer to when Windows 7 starts loading. (We discount Windows loading as it is highly variable given Windows specific features.)


As mentioned earlier in the review, POST time on server motherboards is naturally slow due to the server management tools as well as the extra controllers. POST times are not that important for servers anyway, given that they tend to be restarted far less frequently than desktops or workstations.
USB Backup
For this benchmark, we transfer a set size of files from the SSD to the USB drive using DiskBench, which monitors the time taken to transfer. The files transferred are a 1.52 GB set of 2867 files across 320 folders – 95% of these files are small typical website files, and the rest (90% of the size) are small 30 second HD videos. In an update to pre-Z87 testing, we also run MaxCPU to load up one of the threads during the test which improves general performance up to 15% by causing all the internal pathways to run at full speed.

DPC Latency
Deferred Procedure Call latency is a way in which Windows handles interrupt servicing. In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority. Critical interrupts will be handled as soon as possible, whereas lesser priority requests such as audio will be further down the line. If the audio device requires data, it will have to wait until the request is processed before the buffer is filled.
If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time. This can lead to an empty audio buffer and characteristic audible pauses, pops and clicks. The DPC latency checker measures how much time is taken processing DPCs from driver invocation. The lower the value will result in better audio transfer at smaller buffer sizes. Results are measured in microseconds.

The DPC Latency for the dual E5 2697 v3 setup was not bad - our previous barrier to good/bad was 200 microseconds, although Z97 and X99 have both push the average well below 100. The other two CPUs caused large spikes in our DPC testing, giving results of 502 and 714 microseconds.
Originally published at https://www.anandtech.com/show/8761/gigabyte-server-md60-sc0-motherboard-review-haswell-ep-with-qsfp (Wayback Machine).