Archive 1997–2024

HP z27x Review

For the AdobeRGB calibration we use the same targets as the sRGB calibration only with the AdobeRGB color gamut. Pre-calibration the numbers for the HP z27x in its AdobeRGB mode are perfect. They’re good enough that I would see no reason to calibrate this most likely. The grayscale and gamma could be better, but not by much. I really don’t have much to complain about when it comes to the preset AdobeRGB mode.

Post-calibration it is better, but barely. Since our target during a calibration is an error level of 0.5 dE2000 and it was already there, it was unlikely to improve much if at all. If we set a target of 0.1 dE2000 it might have done even better, but you’re then trying to make an improvement that you cannot see so you are just wasting your time. There is really no more to write about the performance here because it’s just great.

The results are the same when we target 80 cd/m2 and the sRGB gamma. The HP does not have visible errors after calibration. It’s a professional level display and handles this color gamut and setup with ease.

The AdobeRGB modes on our HP z27x were more accurate than the sRGB modes were. Each unit will have some variation here since they are individually calibrated, but what we can see is that HP provides the hardware to create a totally accurate image. Using CalMAN to manipulate the internal LUT we get a display that is incredibly accurate, as good as anything we have seen before.

Originally published at https://www.anandtech.com/show/8739/hp-z27x-review (Wayback Machine).