X-Gene 1, Atom C2000 and Xeon E3: Exploring the Scale-Out Server World
Benchmark Configuration
All tests were done on Ubuntu Server 14.04 LTS. We tested the HP Moonshot remotely. Our special thanks goes out to the team of HP EMEA Moonshot Discovery Lab of Grenoble (France). We tested both the Supermicro MicroCloud and the different motherboard configurations in our lab.
ASRock's C2750D4I
| CPU | Intel Atom C2750 |
| RAM | 4x 8GB DDR3 @1600 or 4x 16GB DDR3 @1333 (Intelligent Memory) |
| Internal Disks | 1x Intel MLC SSD710 200GB |
| Motherboard | ASRock C2750D4I |
| PSU | Supermicro PWS-502 (80+) |
Intel's Xeon E3-1200 v3 – ASUS P9D-MH
| CPU | Intel Xeon processor E3-1240 v3 Intel Xeon processor E3-1230L v3 |
| RAM | 4x 8GB DDR3 @1600 |
| Internal Disks | 1x Intel MLC SSD710 200GB |
| Motherboard | ASUS P9D-MH |
| PSU | Supermicro PWS-502 (80+) |
Intel's Xeon E3-1200 v2
| CPU | Intel Xeon processor E3-1220 v2 Intel Xeon processor E3-1265L v2 |
| RAM | 4x 8GB DDR3 @1600 |
| Internal Disks | 1x Intel MLC SSD710 200GB |
| Motherboard | Intel S1200BTL |
| PSU | Supermicro PWS-502 (80+) |
Supermicro's MicroCloud SYS-5038ML-H8TRF
We enabled four nodes, each with an Intel Xeon E3-1230L v3. Each node was configured with:
| CPU | Intel Xeon processor E3-1230L v3 |
| RAM | 4x 8GB DDR3 @1600 |
| Internal Disks | 1x Intel MLC SSD710 200GB |
| Motherboard | Super X10SLD-F |
| PSU | Dual Supermicro PWS-1K62P-1R (1.6 KW, 80+ Platinum) for 4 nodes |
We first tested with only one PSU, but that did not work out as the firmware kept all Xeons at their minimum clock speed of 800 MHz. Only with both PSUs active were the Xeon able to use all their p-states. Supermicro confirmed that four active nodes should be enough to make the PSU run efficiently.
HP Moonshot
We tested two different cartridges: the m400 and the m300. Below you can find the specs of the m400:
| CPU/SoC | AppliedMicro X-Gene 2.4 |
| RAM | 8x 8GB DDR3 @ 1600 |
| Internal Disks | m2 2280 Solid State 120GB |
| Cartridge | m400 |
And the m300:
| CPU/SoC | Atom C2750 2.4 |
| RAM | 8x 8GB DDR3 @ 1600 |
| Internal Disks | m2 2280 Solid State 120GB |
| Cartridge | m300 |
Other Notes
Both servers are fed by a standard European 230V (16 Amps max.) power line. The room temperature is monitored and kept at 23°C by our Airwell CRACs. We use the Racktivity ES1008 Energy Switch PDU to measure power consumption in our lab. We used the HP Moonshot ILO to measure the power consumption of the cartridges.
Originally published at https://www.anandtech.com/show/8357/exploring-the-low-end-and-micro-server-platforms (Wayback Machine).