Archive 1997–2024

NEC EA244UHD Review

Color Gamut, Input Lag, and Power Use

Measuring the color gamut using our calibrated profiles, the NEC EA244UHD in sRGB emulation mode encompasses 67.2% of the AdobeRGB gamut. This is a little low but not by much. We also can’t fix it since SpectraView II only lets us calibrate to Native gamut. In the AdobeRGB mode we see 92.9% coverage, which is also lower than expected.

LCD Color Gamut

Input lag is measured using the Leo Bodnar lag tester over HDMI. I agree that DisplayPort testing would be better, but with no CRT that can do 3840x2160 resolution to pair with it there is not much to be done about it. The EA244UHD lets you disable scaling, so we can measure if that plays any factor. It turns out that it doesn’t make any change as the lag is 28ms with scaling enabled or disabled. This is almost 2 frames at 60Hz so it probably isn’t suitable for hard core gamers, but it likely wasn’t going to be anyway.

Processing Lag Comparison (By FPS)

Power use is pretty high but might be typical of UltraHD panels. At maximum backlight the disaply uses 76 watts of power on a white screen and 25 watts at minimum power. This is much higher than other 24” monitors but we haven’t seen any other UHD 24” monitors for comparison yet. You can find monitors that use less power, but not with this resolution.

LCD Power Draw (Kill-A-Watt)

Candelas per Watt

 

Originally published at https://www.anandtech.com/show/8335/nec-ea244uhd-review (Wayback Machine).