be quiet! Power Zone 850W CM Power Supply Review
Hot Test Results
From the tables below, you can see that the output power quality of the be quiet! Power Zone 850W CM PSU is mediocre. The maximum voltage ripple that our instrumentation recorded was 64 mV under maximum load, which is about half of the 120 mV design guide limit but not impressive for a high-performance product. With the unit heavily cross-loaded, the maximum ripple increases even further, up to 78 mV. Voltage regulation is at 2.4% on the major 12V line and a little lower on the minor 3.3V/5V lines, which is good but not unusual for a high performance power supply.
| Main Output | ||||||||
| Load (Watts) | 172.41 W | 429.67 W | 633.45 W | 842.16 W | ||||
| Load (Percent) | 20.28% | 50.55% | 74.52% | 99.08% | ||||
| Line | Amperes | Volts | Amperes | Volts | Amperes | Volts | Amperes | Volts |
| 3.3V | 4.06 | 3.39 | 10.14 | 3.39 | 15.21 | 3.36 | 20.29 | 3.33 |
| 5V | 4.06 | 5.08 | 10.14 | 5.05 | 15.21 | 5.00 | 20.29 | 4.97 |
| 12V | 11.36 | 12.15 | 28.40 | 12.11 | 42.60 | 11.89 | 56.80 | 11.86 |
| Line |
Regulation (20% to 100% load) |
Voltage Ripple (mV) | |||||
| 20% Load | 50% Load | 75% Load | 100% Load |
CL1 12V |
CL2 3.3V + 5V |
||
| 3.3V | 1.9% | 12 | 18 | 24 | 30 | 10 | 34 |
| 5V | 2.2% | 10 | 16 | 26 | 30 | 14 | 38 |
| 12V | 2.4% | 24 | 34 | 48 | 64 | 78 | 30 |
High ambient temperatures have a major impact on the energy conversion efficiency of the be quiet! Power Zone 850W CM, reducing the average nominal load (20-100%) efficiency down to 85.1 % and the maximum efficiency of the PSU to 87%. A >4% efficiency drop is very high for a premium product and is most likely caused by the high resistance of the active components (transistors) that this unit uses. The high resistance increases their thermal losses and temperature, the higher temperature increases their resistance even further, and the effect starts to cascade. Nevertheless, even though the efficiency drops quite a bit, the Power Zone 850W CM still meets the 80 Plus Bronze certification while running in a 50C environment (which isn't actually part of the 80 Plus requirements).
The cooling system of the Power Zone 850W CM displays similar cooling behavior as before once placed inside our hot box. The magnitude of the numbers changes, as the unit is obviously hotter and thus runs louder. The temperature of the unit reaches uncomfortable levels when it operates under maximum load for extended periods under such conditions, but the Power Zone 850W CM did work like a charm and we didn't encounter any issues...except for the noise levels.
As you would expect, what was already a somewhat noisy PSU becomes even more so in our hot box. The Power Zone 850W CM will be audible at virtually any load inside a hot environment, which is not exactly what be quiet!'s company scope describes. Again, we've seen better results from the competition, and what's more they have products that cost less than the Power Zone 850W.
Originally published at https://www.anandtech.com/show/8252/be-quiet-power-zone-850w-cm-power-supply-review (Wayback Machine).




