Archive 1997–2024

GIGABYTE BRIX Pro: A Second Look at the Intel i7-4770R with Iris Pro HD 5200

Thermal Performance & Power Consumption

A discussion of the cooling system, fan speeds and subjective noise levels can be found in the first part of our BRIX Pro review. A couple of months back, GIGABYTE came forward with a new BIOS for the BRIX Pro. After installing that, we repeated our extreme power virus test of running Prime 95 and Furmark together at the same time. As expected, the system did throttle within two minutes of starting the test (as shown in the screenshot below).

I am yet to see a system equipped with a Core i7-4770R that has been able to keep up with the CPU and GPU being loaded up simultaneously, and manufacturers contend that it is hardly a realistic use-case. While we tend to agree to a limited extent, we felt it would be worthy of further evaluation. Towards this, we kicked off a run with only Prime 95 loading up all the CPU threads.

After 30 minutes of full CPU loading, we found that the core temperatures were held below 100 C, the clock speeds remained at 3.2 GHz for the CPU (the GPU was 'idling' at 200 MHz) and there was no thermal throttling to be seen. At this point, we introduced Furmark loading into the picture. It becomes clear that the system gives preference to CPU performance. The GPU remains throttled at 200 MHz, while the CPU cores don't thermally throttle.

This is quite a relief, as there are probably no realistic workloads out there which can stress both CPU and GPU to the maximum simultaneously. To verify whether GPU performance perks up after removal of CPU load, we stopped the Prime 95 job and let Furmark continue for more time.

After more than 45 minutes, we found the GPU still clocking in at 1 GHz and running without any throttling issues. The CPU cores were idling at 800 MHz.

On the whole, thermal performance seems to have improved quite a bit with the latest BIOS release and we are actually happy to see that CPU performance just doesn't throttle as long as the GPU doesn't simultaneously ramp up with the CPU.

In terms of power consumption, we gathered the idle and load power numbers (at the wall) with the new configuration. The numbers are presented below.

Idle Power Consumption

Load Power Consumption (Prime95 + FurMark)

The numbers vary slightly from our initial configuration (more efficient at idle, but consumes more power at load), and I believe these related to the BIOS update as well as the memory and storage subsystem changes.

Originally published at https://www.anandtech.com/show/8175/gigabyte-brix-pro-a-second-look-at-the-intel-i74770r-with-iris-pro-hd-5200 (Wayback Machine).