The AM1 Kabini Motherboard Preview: Analyzing the Hardware
ASRock AM1H-ITX
The last motherboard in our roundup is one we have previously featured on AnandTech before Kabini launch. The ASRock AM1H-ITX takes a different direction almost entirely by providing users with the option of powering the system by a power supply or a standard 19V laptop charger. For this latter configuration, ASRock provide a SATA power header on the motherboard for SATA devices, but unless two lower powered units are used, it is only a one-to-one power header.
For being the most expensive Kabini motherboard, ASRock is piling a lot into this model. Alongside an additional controller for SATA 6 Gbps (totaling four ports), there is also another USB 3.0 controller. Both of these are from ASMedia. With the full length PCIe 2.0 slot there is also a mini-PCIe slot for a WiFi card.
Another feature on the AM1H-ITX that sets it apart from the other Kabini motherboards is the inclusion of a DisplayPort on the rear IO. Due to the presence of the DC-In Jack and the larger video outputs, we are limited in USB ports compared to some of the other models. Because there is a DC-In, ASRock has forgone the 4-pin CPU power connector, choosing instead to use power direct from the DC-In or ATX power connector.
The AM1H-ITX is also the only motherboard in this roundup with a 7.1 audio codec, using the Realtek ALC892 compared to the ALC887 or ALC662 on the others which are both 2.1 at best.
| ASRock AM1H-ITX | |
| Price | Link |
| Size | Mini-ITX |
| CPU Interface | FS1b |
| Chipset | Kabini |
| Memory Slots |
Two DDR3 DRAM slots, supporting 16GB Single Channel, 1066-1600 MHz |
| Video Outputs |
VGA (2048x1536 at 60 Hz) DVI-D (1920x1200 at 60 Hz) HDMI (4096x2160 at 24 Hz or 3840x2160 at 30 Hz) DisplayPort (4096x2160 at 30 Hz) |
| Onboard LAN | Realtek RTL8111GR |
| Onboard Audio | Realtek ALC892 |
| Expansion Slots |
1 x PCIe 2.0 x16 (x4) 1 x mini-PCIe |
| Onboard SATA/RAID |
2 x SATA 6 Gbps (Chipset) 2 x SATA 6 Gbps (ASMedia 1061) |
| USB 3.0 |
2 x USB 3.0 (Chipset) [back panel) 2 x USB 3.0 (ASMedia 1042A) [header] |
| Onboard |
4 x SATA 6 Gbps 1 x USB 3.0 Header 2 x USB 2.0 Headers 3 x Fan Headers 1 x COM Header 1 x TPM Header Front Panel Header Front Audio Header |
| Power Connectors |
1 x 24-pin ATX 1 x 19V DC-In on Rear Panel |
| Fan Headers |
1 x CPU (4-pin) 1 x CHA (4-pin) 1 x SYS (3-pin) |
| IO Panel |
1 x 19V DC-In Jack 1 x PS/2 Combination Port VGA DVI-D HDMI DisplayPort 1.2 2 x USB 2.0 2 x USB 3.0 1 x Gigabit Ethernet Audio Jacks (ALC892) |
| Product Page | Link |
Being $59 puts it at almost double the cost of the cheapest motherboards. For the price difference a user could almost pick up one of the lower cost APUs. This all comes back to the question of what functionality a user needs. Does it just have to run and go, or is connectivity a concern?
Originally published at https://www.anandtech.com/show/7945/the-am1-kabini-motherboard-preview-asus-asrock-gigabyte-msi-biostar (Wayback Machine).



