Dell UP3214Q Review
All calibration measurements are done using SpectraCal’s CalMAN 5.1.2 software with a custom workflow. Measurements are done using a C6 colorimeter that is first profiled against an i1Pro spectrometer to ensure accurate results. There are two sets of targets we use. Pre-Calibration and our first calibration aim for 200 cd/m^2 with a sRGB gamut and a gamma of 2.2. This is a common real-world setting for a display. The final target changes the light level target to 80 cd/m^2 and the gamma curve to the tougher sRGB standard.
|
Pre-Calibration |
Post-Calibration, 200 cd/m^2 |
Post-Calibration, 80 cd/m^2 |
|
| White Level (cd/m^2) | 201.4 | 199.1 | 79.8 |
| Black Level (cd/m^2) | 0.2477 | 0.2502 | 0.103 |
| Contrast Ratio | 813:1 | 796:1 | 775:1 |
| Gamma (Average) | 2.26 | 2.22 | 2.41 |
| Color Temperature | 6434K | 6508K | 6553K |
| Grayscale dE2000 | 2.97 | 0.64 | 0.63 |
| Color Checker dE2000 | 1.69 | 0.52 | 0.50 |
| Saturations dE2000 | 1.91 | 0.41 | 0.45 |
Pre-calibration measurements are made using the sRGB preset as most people will likely select it. Set for 200 cd/m2 of output there is a red tint to the grayscale. The gamma is off at 5% but the color tint causes the dE2000 for the grayscale to be in the visible range. Color errors are much better and aside from a few samples it is very acceptable. If the grayscale didn’t have this tint the pre-calibration numbers would be great.
Post-calibration this grayscale issue goes away and the colors improve as well. For both the 200 cd/m2 and the 80 cd/m2 calibrations the numbers improve by a large amount and the image is virtually perfect. There really isn’t anything to complain about, just that if you can calibrate the UP3214Q you will wind up with a virtually perfect image.
Originally published at https://www.anandtech.com/show/7906/dell-up3214q-review (Wayback Machine).

















