Archive 1997–2024

GIGABYTE F2A88X-UP4 Review

Sleeping Dogs

Sleeping Dogs is a benchmarking wet dream – a highly complex benchmark that can bring the toughest setup and high resolutions down into single figures. Having an extreme SSAO setting can do that, but at the right settings Sleeping Dogs is highly playable and enjoyable. We run the basic benchmark program laid out in the Adrenaline benchmark tool, and the Xtreme (1920x1080, Maximum) performance setting, noting down the average frame rates and the minimum frame rates.

Sleeping Dogs: 1080p Max, 1x GTX 770

Sleeping Dogs, 1080p Max
  NVIDIA AMD
Average Frame Rates

Minimum Frame Rates

When we hit three AMD GPUs with Sleeping Dogs, it would seem that PCIe lanes and CPU speed will matter here, as the UP4 does not show much improvement going from two to three cards.

Company of Heroes 2

Company of Heroes 2 also can bring a top end GPU to its knees, even at very basic benchmark settings. To get an average 30 FPS using a normal GPU is a challenge, let alone a minimum frame rate of 30 FPS. For this benchmark I use modified versions of Ryan’s batch files at 1920x1080 on Medium. COH2 is a little odd in that it does not scale with more GPUs.

Company Of Heroes 2: 1080p Max, 1x GTX 770

Company of Heroes 2, 1080p Max
  NVIDIA AMD
Average Frame Rates

Minimum Frame Rates

The UP4 shows a much lower minimum frame rate than the other motherboards we have tested.  This was consistent along reboots, suggesting a similar issue to the other benchmarks that did not have full turbo enabled.

Originally published at https://www.anandtech.com/show/7876/gigabyte-f2a88xup4-review (Wayback Machine).