ASRock FM2A88X Extreme6+ Review
ASRock FM2A88X Extreme6+ Conclusion
Motherboards bearing the FM2+ name fall into two categories – those released before the Kaveri launch in January and those released alongside or after. For the first category, certain assumptions about the state of the final Kaveri silicon had to be made, and the motherboards built around those assumptions. Because of the processing node difference between Richland and Kaveri and the differing voltage characteristics of the two processors therein, it was important to ‘over-engineer’ a motherboard to consider the potential consequences a hungry Kaveri could have made.
A similar comparison could be drawn with 990FX motherboards, first taking Zosma/Thuban K10 style cores and then moving onto the Bulldozer/Piledriver combination that exists. Some 990FX motherboards built could not seem to handle the stress of the new architecture.
The ASRock FM2A88X Extreme6+ is not that problematic – it will run both Richland and Kaveri without skipping a beat, as long as sufficient provisions are made to the power delivery cooling especially if the system is overclocked. It seems rough that the system would provide very high temperatures at stock (or stock + 20 minutes of intense CPU usage), but that is the unfortunate reality of the situation of our review. Ultimately this leads to the recommendation that users update the BIOS before they start installing an operating system, which in our testing led to a better temperature gradient after heavy CPU loading.
Temperature issues aside, the Extreme6+ sits at the top end of ASRock’s FM2 stack, with the Realtek ALC1150 audio codec, additional USB 3.0 ports and the BIOS/software platform being worthy of note. In performance terms ASRock trades blows with another motherboard we have on our test bed but not yet reviewed, although we will have to test a number of other FM2+ motherboards to see where it stacks up against the competition. Having a POST time lower than 10 seconds is a plus, although the lack of extras in the box for a high end FM2+ motherboard might be cause for concern. For legacy users who want to dabble with HSA, lots of memory, PCI and a COM port, ASRock has you covered with the FM2A88X Extreme6+.
Originally published at https://www.anandtech.com/show/7865/asrock-fm2a88x-extreme6-review (Wayback Machine).
