Archive 1997–2024

OCZ Vertex 460 (240GB) Review

Random Read/Write Speed

The four corners of SSD performance are as follows: random read, random write, sequential read and sequential write speed. Random accesses are generally small in size, while sequential accesses tend to be larger and thus we have the four Iometer tests we use in all of our reviews.

Our first test writes 4KB in a completely random pattern over an 8GB space of the drive to simulate the sort of random access that you'd see on an OS drive (even this is more stressful than a normal desktop user would see). I perform three concurrent IOs and run the test for 3 minutes. The results reported are in average MB/s over the entire time. We use both standard pseudo randomly generated data for each write as well as fully random data to show you both the maximum and minimum performance offered by SandForce based drives in these tests. The average performance of SF drives will likely be somewhere in between the two values for each drive you see in the graphs. For an understanding of why this matters, read our original SandForce article.

Desktop Iometer - 4KB Random Read

Desktop Iometer - 4KB Random Write

Desktop Iometer - 4KB Random Write (QD=32)

In random read/write tests the Vertex 460 and Vector 150 trade punches but the differences are minor. Our Vector 150 sample was tested a few months back so minor differences in firmware could account for the increased random read/write results, or it may simply be margin of error.

Sequential Read/Write Speed

To measure sequential performance I ran a 1 minute long 128KB sequential test over the entire span of the drive at a queue depth of 1. The results reported are in average MB/s over the entire test length.

Desktop Iometer - 128KB Sequential Read

Same goes for sequential performance: the Vertex 460 and Vector 150 perform more or less equally.

Desktop Iometer - 128KB Sequential Write

Sequential performance gives the Vector 150 a slight edge in both read and write results, but the difference is only a few percent at most.

AS-SSD Incompressible Sequential Read/Write Performance

The AS-SSD sequential benchmark uses incompressible data for all of its transfers. The result is a pretty big reduction in sequential write speed on SandForce based controllers.

Incompressible Sequential Read Performance

Incompressible Sequential Write Performance

Originally published at https://www.anandtech.com/show/7708/ocz-vertex-460-240gb-review (Wayback Machine).