Archive 1997–2024

The WD Black2 Review: World's First 2.5" Dual-Drive

Power Consumption

The idle power consumption comes out fairly high. Given that there are more components than in a regular SSD, I was expecting higher power draw but 1.32W is more than I would've thought. Note that this is SSD only -- the hard drive isn't even spinning, although its controller still draws some power. Since notebooks are the target market of the Black2, I would have liked to see some sort of low-power state support (HIPM+DIPM and DevSleep) or at least lower idle power consumption in general.

Drive Power Consumption - Idle

Load power consumption isn't nearly as bad. If the SSD and HDD are accessed simultaneously, the power draw is obviously higher than that of a single drive but not critically. If you ran a normal dual-drive setup, the power draw could easily be more than 4.5W anyway.

Drive Power Consumption - Sequential Write

Drive Power Consumption - Random Write

Originally published at https://www.anandtech.com/show/7682/the-wd-black2-review (Wayback Machine).