We put the Netgear ReadyNAS 716 through some IOMeter tests with a CIFS share being accessed from up to 25 VMs simultaneously. The following four graphs show the total available bandwidth and the average response time while being subject to different types of workloads through IOMeter. IOMeter also reports various other metrics of interest such as maximum response time, read and write IOPS, separate read and write bandwidth figures etc. For this benchmark, the two 10GBase-T ports were link aggregated and connected to two ports teamed on the XS712T. The XS712T's SFP+ ports were teamed and connected to the teamed SFP+ ports of the GSM 7352S (to which the rest of the VMs were physically connected). The graphs below present the results. Other interesting aspects from our IOMeter benchmarking run can be found here.
The graphs for the some of the rackmount units we have evaluated earlier are also presented as reference, but do remember that most of them have different number of disks in RAID-5 configuration. The Synology DS1812+ was also benchmarked with hard disks instead of the OCZ Vector SSDs used for the ReadyNAS 716. With speeds reaching close to 800 MBps in RAID-5 for certain access patters, the RN716X lives up to the claim from Netgear of being the fastest desktop NAS. It is possible to obtain even higher bandwidth numbers for specific access patterns by enabling jumbo frames in the network path.