Monoprice Zero-G Slim 27" IPS Monitor Review
The Monoprice Zero-G seems to be clearly aimed at those after a cheap 27” 2560x1440 monitor who don’t care about extras or frills. This market was opened up by Korean imports like the Catleap and now has a number of companies trying to compete with those eBay sellers. Monoprice is entering the fray with the Zero-G, currently available for $391. That's a good price, but what does it get you?
The Zero-G is a bit curious in its results. The out-of-box numbers are really quite bad, and the Brightness control does not function correctly. Outside of a narrow range it simply doesn’t do what it's supposed to do, and adjusting it too much causes a huge loss of contrast ratio as well as even worse gamma. The color accuracy also is very poor out of the box.
Once you calibrate it, the Monoprice puts out a fantastic image. The contrast ratio suffers due to the brightness limitation, but color and grayscale accuracy, as well as gamma, are spot-on. This behavior put the Zero-G into an area that makes it harder to recommend as a good solution for users.
If you need accuracy, you can spend $150-200 more and grab the Dell U2713HM, which is frequently on sale for around $600. You also gain an adjustable stand and multiple inputs instead of just DVI. You could spend the money on calibration gear, but by the time you have an accurate setup (which means software and a spectrometer, not just a colorimeter) you’re well past the price difference between the Monoprice and the Dell.
If you want to go cheap, for almost the same price you can find the Nixeus VUE 27 display for $485. It also has a stand and OSD that are entry-level like the Monoprice, but it has more inputs and better uncalibrated results. If you have a laptop or desktop without DVI output, you’re better off with the Nixeus as the DispayPort input alone will save you from buying a DVI-DL adapter that the Monoprice requires. I’ve seen the Nixeus selling for as little as $400 recently, and at that point the price different is negligible.
If the Monoprice had better out-of-the-box numbers I can see it being a good choice for some people. With its numbers and its lack of non-DVI inputs, that pool of users grows smaller. Factor in the strange rear-mounted controls and the competition it has, and it gets smaller still. Perhaps Monoprice can improve their firmware and get better results but right now the hardware itself doesn’t function as expected. With all the other choices available on the market, it’s hard to recommend the Monoprice Zero-G over another display that can be had for the same price and offers better performance and features.
Originally published at https://www.anandtech.com/show/7240/monoprice-zerog-slim-27-ips-monitor-review (Wayback Machine).