BitFenix Ronin Case Review
- Posted in
- Cases/Cooling/PSUs
- bitfenix
- ATX
Noise and Thermal Testing
The BitFenix Ronin unfortunately enters noise and thermal testing a bit hobbled. While I would've appreciated a fan controller, it's not strictly necessary. BitFenix is using two of their Spectre fans in the Ronin, and these fans are incredibly quiet. That's the upshot.
The downside is that there are only two quiet 120mm fans tasked with keeping the Ronin cool, and that plays hell on performance. You'll see Ronin fall into the same trap that a lot of silent cases do: without adequate airflow, internal cooling has to pick up the slack and runs louder as a result. Silent computing is a difficult balancing act and one that the Ronin is unable to get a good handle on.
Ambient temperatures were between 23C and 24C for testing.



You can see stock cooling performance is pretty poor and easily bested by other, less expensive cases.


The poor thermal performance could at least be justified if the Ronin did a better job with noise, but it's just not there in any capacity and it only gets worse when you overclock the testbed.



Overclock the testbed and suddenly the Ronin is finishing dead last. The two Spectre fans just aren't up to the task of keeping the system cool. Low case volume and low airflow are a deadly combination.


Noise levels are unfortunately unsurprising. The Ronin just runs hot and loud under load.
It's hard not to feel at least a little disheartened by these results, and I went into full fat testing with some trepidation.





Note that the CPU runs hotter under load in our basic overclocked testbed than in our full fat despite the fact that it's running at the same voltage and speed in both. The GTX 580 blower-style coolers are able to pull much more weight than the GTX 560 Ti's open air cooler, keeping the Ronin from cooking the CPU. Unfortunately, the GPUs are running toasty in the process, hitting the 90s under load and actually maxing out their fan speeds.


It's "quieter" than the other cases in its class, but that's not saying much. The fact remains that airflow is a serious issue in the Ronin.
Originally published at https://www.anandtech.com/show/7158/bitfenix-ronin-case-review (Wayback Machine).