ioSafe N2: A Disaster-Resistant Synology DS213
Performance Benchmarks - Multiple Clients
We put the ioSafe N2 / Synology DS213 through some IOMeter tests with a SMB share being accessed from up to 25 VMs simultaneously. The following four graphs show the total available bandwidth and the average response time while being subject to different types of workloads through IOMeter. IOMeter also reports various other metrics of interest such as maximum response time, read and write IOPS, separate read and write bandwidth figures etc. Selected metrics from the evaluation of the ioSafe N2 are available here.
Some of the data points for the average response time are beyond the plotted range in the graphs below. This is done on purpose to keep the scales consistent across evaluation of different NAS units. The 'missing' numbers can be seen in the evaluation summary. In any case, the metrics show that the ioSafe N2 / Synology DS213 provides very good performance for scenarios involving around 10 to 12 simultaneous clients. Beyond that, NAS units with dual network interfaces and more powerful processors are required.




A better point of comparison is the Synology DS211+ which we tested in the initial testbed build process. The scales are different (which is why we decided not to link the plots directly here), but the performance in terms of number of simultaneous clients remains approximately the same.
Originally published at https://www.anandtech.com/show/6806/iosafe-n2-a-disasterresistant-synology-ds213 (Wayback Machine).