Rosewill Line-M Case Review: Wherefore Art Thou Micro-ATX?
- Posted in
- Cases/Cooling/PSUs
- MicroATX
- Rosewill
Noise and Thermal Testing
When I moved onto testing the Rosewill Line-M, I actually had a funny feeling it would turn out to be a pretty solid performer. Noise levels were entirely at the mercy of Rosewill's fan choices (and those fan choices are pretty lackluster, admittedly), but the way airflow moves through the enclosure is very direct and neat. You don't need a lot of fans to get good cooling, you just need a couple of them, smartly placed.



All you really need are two well-placed 120mm fans and you have a solid performer. The Line-M produces excellent thermal results in our stock testing, although the SSD does absorb at least a little bit of heat from the bottom of the chassis.

Unfortunately, you really pay in a major way in noise. To Rosewill's credit, the character of the Line-M's noise isn't actually too bad, mostly a low-pitched hum. The problem is that the two fans included are both conventional 3-pin, voltage-controlled fans. If you use a motherboard with good fan control you can probably mitigate this, but running at full bore they definitely make themselves known.
With such solid thermal results for our stock testbed, I was eager to see if the Line-M would still be able to hold up when placed under the stress of our overclocked system.



Once again, the Rosewill Line-M is able to produce very competitive performance. Enthusiasts looking to build an overclocked machine on the cheap may actually want to eyeball this case if only because its stock cooling configuration is so efficient.

While idle noise is still pretty bad, load noise is actually mitigated somewhat by the case's excellent airflow. Even with a decent mess of cabling around that front fan, air flows smoothly and freely through the Line-M.
Originally published at https://www.anandtech.com/show/6798/rosewill-line-m-case-review-wherefore-art-thou-microatx (Wayback Machine).