Nanoxia Deep Silence 2 Case Review: Trimming the Fat
- Posted in
- Cases/Cooling/PSUs
- quiet
- ATX
- Nanoxia
Noise and Thermal Testing
Going into testing, I remained cautiously optimistic about the Nanoxia Deep Silence 2. Most of the original design cues are essentially intact from the DS1 and I remain overjoyed as ever by the inclusion of the analog fan controller, but silent cases still continue to run the age old risk of restricting airflow to the point where heatsink fans have to run much faster to keep thermals down.
Whenever I include test results from older cases with fan controllers, I tend to include the results that present the best balance of noise and performance. The Deep Silence 1 is unique in that it's one of the only cases where I include the high fan results instead of the low, as the low setting is essentially inaudible while the high setting is only marginally louder while producing substantially better thermal performance. You'll see the DS2 is basically the same way.
Ambient temperatures hovered around 22C during testing.



The DS2 runs into the same problem the DS1 did: the low fan setting just doesn't move very much air. It's quiet, sure, but it also runs very hot. At their respective high settings, though, the DS1 and DS2 do offer fairly comparable performance.

Unfortunately, you'll see the DS1 also has generally better acoustics than the DS2 does. The DS2 is still a very quiet case and it beats the BitFenix Ghost, but the AZZA Silentium runs ever so slightly quieter. Your best bet for silence continues to be the DS1.
When I saw the thermal results for the DS2, at least at the low fan setting, I lost some of my optimism. It's only when you max out the fans that the DS2's performance becomes competitive, but this is the trade you traditionally make when you move to a silent case.



Overclocked thermals remain fairly competitive provided you leave the fans on high, and the DS2 puts in a strong showing against its predecessor.

The noise level results get back to what I was talking about before; because the low fan setting doesn't move as much air, the heatsink fans spin much higher, and the DS2 actually gets pretty loud as a result. If you max out the fans, the DS2 is suddenly one of the quietest cases we've ever pitted against our overclocked testbed.
Originally published at https://www.anandtech.com/show/6742/nanoxia-deep-silence-2-case-review-less-of-what-we-needed (Wayback Machine).