The new Opteron 6300: Finally Tested!
LS-DYNA Power Consumption
For HPC buyers, peak power tends to be a very important metric. As HPC systems are run at close to or equal to 100% CPU load, the energy consumption is at its peak for a long time. Peak power thus also determines the cooling and energy requirements. This is in sharp contrast with most other servers, where calculating the power and amps based on the peak load of a complete rack is considered wasteful as it is highly unlikely that all servers will hit 100% CPU load at the same time. We took the 95th percentile of our power numbers.

Note that the Xeon E5 numbers are not directly comparable to the Opteron numbers as the CPUs are tested in servers with different form factors. We will tackle that in the next test. Let us focus on the Opteron results for now.
AMD has made some real progres here. At the same clock, the total power consumption is 6% lower. Even at a 200MHz higher clock the peak power is very slightly—but consistently—lower (2%).
Of course, we also want to compare the AMD and Intel CPUs directly. To do this, we always run the fans at maximum speed. That way, the fans always consume the same amount of power. We then test with one and two CPUs, while keeping the amount of memory (64GB) the same. This way we measure how much extra power you consume at the wall when you add a second CPU. This number thus includes the voltage regulators (which can amount to up to 10% of the total server power) and the PSU inefficiency.

The Intel Xeon has a TDP of 95W, but even with a very FP intensive application it does not get anywhere near that number. About 75W out of those 94W are consumed by the CPU, as measured by our Hardware Monitoring Software that reads out the MSRs. We are still working on our version for the AMD platform (AMD's documentation is a bit late), but we estimate that the Opteron 6376 consumes about 110W and the Opteron 6380 needs about 120W. That means that AMD's top CPUs are probably consuming a bit more than their TDP indicates if you push the FP unit hard.
We also tried to measure idle power. Take the numbers with a grain of salt, but we measured about 19-20W for the Opteron 6380 (p-states disabled), 17-18W for the Opteron 6376 and 16-17W for the Xeon.
Originally published at https://www.anandtech.com/show/6508/the-new-opteron-6300-finally-tested (Wayback Machine).