Archive 1997–2024

ASRock FM2A85X Extreme6 Review

USB Speed

For this benchmark, we run CrystalDiskMark to determine the ideal sequential read and write speeds for the USB port using our 240 GB OCZ Vertex3 SSD with a SATA 6 Gbps to USB 3.0 converter.  Then we transfer a set size of files from the SSD to the USB drive using DiskBench, which monitors the time taken to transfer.  The files transferred are a 1.52 GB set of 2867 files across 320 folders – 95% of these files are small typical website files, and the rest (90% of the size) are the videos used in the Sorenson Squeeze test.

USB 2.0 Sequential Read Speed

USB 2.0 Sequential Write Speed

USB 2.0 Copy Test

For USB 2.0, it alarmingly comes down to an Intel advantage over AMD.  Compared to the ASUS FM2 board we have tested, the ASRock also lags behind slightly.  With use of XFast USB however, the ASRock does claw back some time compared to all the other systems.

USB 3.0 Sequential Read Speed

USB 3.0 Sequential Write Speed

USB 3.0 Copy Test

Similarly with USB 3.0, under Windows 7 and despite the AMD systems having native USB 3.0, there is a distinct dichotomy between Intel and AMD, even with controllers on Intel products (like the RIVG). The ASRock still remains competitive with XFast USB however.

DPC Latency

Deferred Procedure Call latency is a way in which Windows handles interrupt servicing.  In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority.  Critical interrupts will be handled as soon as possible, whereas lesser priority requests, such as audio, will be further down the line.  So if the audio device requires data, it will have to wait until the request is processed before the buffer is filled.  If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time, resulting in an empty audio buffer – this leads to characteristic audible pauses, pops and clicks.  Having a bigger buffer and correctly implemented system drivers obviously helps in this regard.  The DPC latency checker measures how much time is processing DPCs from driver invocation – the lower the value will result in better audio transfer at smaller buffer sizes.  Results are measured in microseconds and taken as the peak latency while cycling through a series of short HD videos - less than 500 microseconds usually gets the green light, but the lower the better.

DPC Latency Maximum

All ASRock products in the past 12 months have given a score below 200 microseconds, which is a great sight to see.  Here is no different, and the FM2A85X Extreme6 gives a score of 179 microseconds.

Rightmark Audio Analyser

Rightmark Audio Analyser is a commonly used tool to confirm quality within an audio setup. It tests features such as noise levels, dynamic range, harmonic distortion, stereo crosstalk, and general performance. The nature of the software makes it hard to compare two different setups, unless they are equal (including volume control and effects).  Rightmark:AA outputs the scores and gives them a rating from Very Poor to Excellent.  We use the Dynamic Range and THD+N results for publication under 16-bit resolution for 48 kHz, 96 kHz and 192 kHz.

RightMark Audio Analyzer: Dynamic Range

RightMark Audio Analyzer: THD + Noise

Originally published at https://www.anandtech.com/show/6478/asrock-fm2a85x-extreme6-review (Wayback Machine).