ASRock Vision HT: Ivy Bridge Carries the SFF HTPC Forward
- Posted in
- Home Theater
- ASRock
- HTPC
- Ivy Bridge
Before proceeding to the business end of the review, let us take a look at some power consumption numbers. We measured power drawn at the wall when the unit was idle (with the display still being driven over HDMI and without), one hour after subjecting the unit to Prime95 and Furmark simultaneously and when playing back a 1080p24 Blu-ray movie from the optical drive with HD audio bistreaming. In all cases, the Wi-Fi was active (no wired Ethernet). A wireless keyboard and mouse was also connected to the unit.
| ASRock Vision HT 321B Power Consumption | |
| Idle (Display off) | 12.66 W |
| Idle (Display on) | 14.3 W |
| Prime95 + Furmark (Full loading) | 58.68 W |
| 1080p24 Blu-ray Playback using CyberLink PowerDVD 12 | 28.04 W |
The thermal solution used in the Vision HT 321B is very similar to the one used in the CoreHT 252B. We have already covered the thermal performance in detail in the previous reviews of ASRock HTPCs, and I found no discernible difference in the actual performance of the units. Full loading produces less than 35 dB of noise, and this is as good as what one can get with an actively cooled system.
The Vision HT 321B is definitely a good upgrade over the CoreHT 252B. By increasing the hard disk capacity, moving to DDR3-1600 for the DRAM and including dual-band Wi-Fi and Bluetooth support, ASRock has put in some thinking before doing an upgrade to the CoreHT lineup. Intel's advancements with Ivy Bridge (particularly, increased GPU capabilities and lower power consumption) also serve ASRock well in the upgrade.
It is almost impossible to avoid a comparison with the Mac mini which comes in with comparable specs for $599 (although it doesn't have a Blu-ray drive and has only a 500 GB HDD). At $680, there is a $80 premium for the ASRock unit, and all said, the PC ecosystem is preferred by more users for HTPC duties compared to the Mac mini. For readers looking to purchase the unit, I would advise a look at the Newegg reviews where there have been reports of internal components getting burnt when power is supplied. Our review unit has had no such issues in the last four months that it has been continuously on. However, such an issue is definitely possible and ASRock indicated that they are looking into it. Quality control and thermal design are aspects that ASRock need to pay more attention to in the future product lines.
Originally published at https://www.anandtech.com/show/6443/asrock-vision-ht-ivy-bridge-carries-the-sff-htpc-forward (Wayback Machine).