SilverStone Sugo SG09 Case Review: Someone at SilverStone Loves Tetris
Noise and Thermal Testing, Overclocked
SilverStone seems to have done an excellent job engineering the Sugo SG09 for CPU cooling, but graphics card cooling in our stock testing wasn't the revelation the processor side was. They've almost proved that you can still have a very small system with great thermals (admittedly sacrificing some thermal performance on the storage side), so how well did the SG09 handle our higher voltage overclocked testbed?
Just as well, as it turns out.
Testing was again done at an ambient temperature of ~23C with the top intake fan at both low and high speeds.



Graphics card temperatures are competitive, but they're not exceptional. Meanwhile the CPU temperatures continue to impress; the 180mm intake fan's low fan speed actually seems to be enough to basically saturate the cooling potential of the heatsink itself, as raising the fan speed offers virtually no improvement in performance.


Again, fan speeds are competitive. The reviewer's guide promises the SG09 is equipped to handle high performance, high heat components and by and large that seems to be true.

Unfortunately the case is still, frankly, kind of noisy. It does better here where overclocking pushes noise levels harder, but I continue to strongly suggest installing a fan controller. It's obvious the SG09 has a substantial amount of cooling power on tap, so the prudent thing would probably be to get system performance where you want it and then find a good balance between thermals and noise.
Originally published at https://www.anandtech.com/show/6390/silverstone-sugo-sg09-case-review-someone-at-silverstone-loves-tetris (Wayback Machine).