Linux Video Card Comparison - October 2000
- Posted in
- GPUs
XFree86 Setup: General
As mentioned before, a large number of the responses to the previous article dealt with configuration issues. We listened, and here's the general setup for those of you interested in playing with DRI. Also, please read the information on DRI's web page, as it's extremely useful when setting these cards up.
Note that this setup may not be necessary, as many distributions are including XFree86 4.0.1 and associated configuration utilities. The two that come to mind are Red Hat 7.0 and SuSE 7.0, but others may as well. These tests were conducted on Red Hat 7.0, which was intelligent enough to automatically configure several cards without manual intervention. Of course, we modified some parameters and installed more recent drivers for the NVIDIA and Matrox cards. Still, in time the installation procedure will get easier and easier.
To start, you need a basic /etc/X11/XF86Config file (Red Hat 7.0 uses /etc/X11/XF86Config-4 so as to allow support for both XFree86 3.3.6 and 4.0.1). Please note that the following file is only intended as a base point. It is very likely that you will need to modify paths or monitor settings. Note that my monitor accepts a wide range of frequencies. CHANGE THESE OR YOU MAY CAUSE DAMAGE TO YOUR MONITOR. You have been warned! Here is a basic file to get started:
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
Load "dri"
EndSection
Section "ServerFlags"
Option "blank time" "10" # 10 minutes
Option "standby time" "20"
Option "suspend time" "30"
Option "off time" "60"
EndSection
Section "InputDevice"
Identifier "Keyboard"
Driver "keyboard"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "PS/2"
EndSection
Section "Monitor"
Identifier "Monitor"
HorizSync 30-95
VertRefresh 50-150
Option "dpms"
EndSection
Section "Device"
Identifier "Video Card"
Driver "mga"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "Video Card"
Monitor "Monitor"
DefaultDepth 16
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Simple"
Screen "Screen 1"
InputDevice "Mouse" "CorePointer"
InputDevice "Keyboard" "CoreKeyboard"
EndSection
Originally published at https://www.anandtech.com/show/632 (Wayback Machine).