Archive 1997–2024

Plextor M5 Pro (256GB) Review

Performance Over Time & TRIM

Just like Plextor's other SSDs we have tested, the M5 Pro comes with Plextor's proprietary "True Speed" technology. At the ground level, "True Speed" is just a fancy name for Plextor's own garbage collection and wear leveling algorithms, which we have found to be fairly effective. As usual, lets run HD Tach on a secure erased drive to get baseline performance:

I secure erased the drive again, filled all user accessible LBAs with sequential data and proceeded with our 20-minute torture test (4KB random writes at queue depth of 32 and 100% LBA space):

There are no surprises here. Write speed is jumping back and forth from as low as 60MB/s to up to 340MB/s. Average write speed is 169.5MB/s, which is similar to what we have seen with other Plextor SSDs.

While 20 minutes of torture is more than enough to create a worst case scenario for a consumer workload, it's not enough to put today's drives in the worst possible state. Thus I secure erased the drive and extended the length of torture to 60 minutes:

And average performance drops to around 50MB/s. That's actually 12.3MB/s slower than what the M5S scored in a similar test, although 50MB/s is fairly normal for non-SandForce SSDs. 

Next I let the drive idle for 30 minutes to let Plextor's idle time garbage collection go to work:

Performance is significantly better compared to what it was before the idle time. Write speeds are now ranging from 80MB/s to up to 340MB/s, and the average ends up being 201.4MB/s. The M5S did recover better from dirty state, although this stuff isn't always deterministic. 

Most SSDs are used in TRIM-supported environments thankfully. After 20-minute torture and one run of HD Tach, I TRIM'ed the drive to make sure TRIM works properly:

Originally published at https://www.anandtech.com/show/6153/plextor-m5-pro-256gb-review (Wayback Machine).