Archive 1997–2024

In Win GreenMe 650W

Voltage Regulation

+3.3V Regulation/Ripple and Noise
Load Voltage
5% +1.94% (5mV)
10% +1.38% (8mV)
20% +1.00% (12mV)
50% -0.24% (14mV)
80% -1.14% (17mV)
100% -1.87% (20mV)
110% -2.05% (24mV)
Crossload +12V max. +0.34%
Crossload +3.3V/+5V max. +0.60%

 

+5V Regulation/Ripple and Noise
Load Voltage
5% +0.56% (3mV)
10% +0.25% (6mV)
20% -0.32% (6mV)
50% -1.00% (10mV)
80% -1.24% (14mV)
100% -1.56% (17mV)
110% -1.80% (18mV)
Crossload +12V max. +1.00%
Crossload +3.3V/+5V max. -0.50%

 

+12V Regulation (Worst Ouput)/Ripple and Noise (Worst Output)
Load Voltage
5% +1.00% (8mV)
10% +1.00% (12mV)
20% +0.88% (17mV)
50% +0.31% (38mV)
80% +0,03% (48mV)
100% -0.81% (68mV)
110% -1.27% (75mV)
Crossload +12V max. -0.71%
Crossload +3.3V/+5V max. +0.42%

Noise Levels

Sound Pressure Level (Ambient: 16dBA, 1m distance) and Temperatures (Δϑ to 23.4 °C ambient temperature)
Load Opinion
5% 17 dBA (1.1°C)
10% 18 dBA (2.9 °C)
20% 18 dBA (4.5 °C)
50% 25 dBA (7.3 °C)
80% 27 dBA (10.1 °C)
100% 29 dBA (11.5 °C)
110% 32 dBA (12.9 °C)

Efficiency and PFC

Efficiency and Power Factor 115 VAC
Load Efficiency PFC
5% 69.84% 0.888
10% 73.93% 0.948
20% 84.30% 0.959
50% 87.40% 0.976
80% 86.10% 0.987
100% 85.07% 0.990
110% 84.11% 0.992

 

Efficiency and Power Factor 230 VAC
Load Efficiency PFC
5% 72.59% 0.823
10% 76.32% 0.898
20% 85.10% 0.934
50% 88.12% 0.961
80% 86.75% 0.974
100% 85.92% 0.981
110% 85.26% 0.988

This time we measured the sound pressure level and found out, that this PSU has a common fan speed regulation. The RPMs are tolerable up to 50-80% load. Beyond that point, this PSU is no more silent than competing solutions, but we should keep in mind that most GPUs are louder while gaming so the results are fine. Note the difference the power grid makes in terms of efficiency. 115VAC means higher current and more stress for all power supplies, while 230VAC shows a worse power factor at all loads. Nevertheless, 0.823-0.988 PFC is still good and most users will find 87% efficiency more than sufficient.

All the rails fall clearly within ATX specifications. They start slightly over the target voltage and end with results close to -2%. Since this PSU has four 12V outputs, we selected the worst rail for the tables (which is our standard procedure). +12V shows the best regulation, and will have no trouble with higher voltages. Both smaller rails have less than 30mV ripple and noise, while +12V reached 75mV.

Originally published at https://www.anandtech.com/show/5931/in-win-greenme-650w (Wayback Machine).