Codegen P-Case 460W - Low Price, Poor Quality
Cables and Conenctors
| Cables and Connectors (650W) | ||
|
Connector type (length) |
Main | 1x 24-pin (30cm) fixed |
| ATX12V/EPS12V | 1x 4-pin (30cm) fixed | |
| PCIe | 0x 6/8-pin | |
| Peripheral | 1x HDD, 1x SATA (ca. 30, 45cm) fixed | |
| 1x HDD, 1x SATA, 1x FDD (ca. 30, 45, 60cm) fixed | ||
The main cables are very short at less than 40cm, and there are only two SATA and two Molex power connectors along with a single FDD connector for disk drives and some fan controller. We don't want to be too quick to judge, but this is not a good configuration for a 460W PSU; it looks more like a 200W PSU. We'll get into more details now.
Voltage Regulation
| +3.3V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | 3.36V (8mV) |
| 10% | 3.35V (12mV) |
| 20% | 3.34V (27mV) |
| 50% | 3.29V (34mV) |
| 80% | |
| 100% | |
| 110% | |
| Crossload +12V max. | |
| Crossload +3.3V/+5V max. | |
| +5V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | 5.21V (12mV) |
| 10% | 5.19V (14mV) |
| 20% | 5.16V (19mV) |
| 50% | 5.02V (25mV) |
| 80% | |
| 100% | |
| 110% | |
| Crossload +12V max. | |
| Crossload +3.3V/+5V max. | |
| +12V Regulation (Worst Ouput)/Ripple and Noise (Worst Output) | |
| Load | Voltage |
| 5% | 12.31V (16 mV) |
| 10% | 12.36V (10mV) |
| 20% | 12.44V (46mV) |
| 50% | 12.78 V (80mV) |
| 80% | |
| 100% | |
| 110% | |
| Crossload +12V max. | |
| Crossload +3.3V/+5V max. | |
Noise Levels
| Loudness (subjective) | |
| Load | Opinion |
| 5% | audible fan bearing |
| 10% | low rotation noise |
| 20% | low rotation noise |
| 50% | strong rotation noise |
| 80% | |
| 100% | |
| 110% | |
Efficiency and PFC
| Efficiency and Power Factor 230 VAC | ||
| Load | Efficiency | PFC |
| 5% | 58.50% | 0.477 |
| 10% | 66.62% | 0.513 |
| 20% | 71.01% | 0.540 |
| 50% | 73.32% | 0.576 |
| 80% | ||
| 100% | ||
| 110% | ||
The power factor reaches a maximum of 0.576. We had to test this PSU with 230VAC only but everybody can image how low the results would be with 115VAC input. Under load the power supply is clearly audible, and the fan's bearing can be heard sometimes. The PSU didn't survive 80% load and died. It was impossible to document the results here. Moreover there was a clear overvoltage on 12V during 50% load. According to ATX specification the upper limit is 12.60V. In addition ripple & noise could be lower.
Originally published at https://www.anandtech.com/show/5791/codegen-pcase-460w-low-price-poor-quality (Wayback Machine).