Rosewill Capstone 450W and 650W 80Plus Gold
Electronics
This time SuperFlower is the manufacturer. In the pictures above we show the 650W version only since the 450W model consists of the same design. Rosewill uses a resonant converter like Enermax and Seasonic; on the input side, a half bridge circuit is used. Furthermore, the model has some small PCBs, where the one on the left side is used for +3.3V and +5V. Where needed, a protective foil against short circuits is used. The output wires are grouped together with serveral cable ties to improve airflow.
Behind the AC input are a total of four Y-capacitors, two common mode chokes, two X-capacitors, a thermistor, and a relay. Nevertheless there is no MOV. All capacitors are made by Nippon Chemicon (SMQ and KY series). In the power factor preregulator and behind we can find a few MOSFETs with a low turn-on resistance, and a PFC diode without any reverse recovery time. This is a good solution when using the continuous current mode, because the reverse recovery time causes power loss. One point of criticism is that SuperFlower should use another PCB material in a high-end product.
Originally published at https://www.anandtech.com/show/5698/rosewill-capstone-450w-and-650w-80plus-gold (Wayback Machine).





