Rosewill Hive 550W
Voltage Regulation
| +3.3V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +2.72% (5mV) |
| 10% | +2.72% (7mV) |
| 20% | +2.42% (11mV) |
| 50% | +2.12% (12mV) |
| 80% | +1.52% (13mV) |
| 100% | +1.52% (15mV) |
| 110% | +1.21% (19mV) |
| Crossload +12V max. | +3.03% |
| Crossload +3.3V/+5V max. | +0.30% |
| +5V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +3.40% (4mV) |
| 10% | +3.40% (3mV) |
| 20% | +3.40% (7mV) |
| 50% | +3.00% (10mV) |
| 80% | +2.60% (12mV) |
| 100% | +2.40% (14mV) |
| 110% | +2.00% (18mV) |
| Crossload +12V max. | +3.20% |
| Crossload +3.3V/+5V max. | -0.20% |
| +12V Regulation (Worst Ouput)/Ripple and Noise (Worst Output) | |
| Load | Voltage |
| 5% | +2.25% (7mV) |
| 10% | +2.08% (11mV) |
| 20% | +1.92% (29mV) |
| 50% | +1.58% (41mV) |
| 80% | +1.25% (52mV) |
| 100% | +0.92% (60mV) |
| 110% | +0.75% (64mV) |
| Crossload +12V max. | +1.08% |
| Crossload +3.3V/+5V max. | -0.17% |
Noise Levels
| Loudness (subjective) | |
| Load | Opinion |
| 5% | audible fan rotation |
| 10% | audible fan rotation |
| 20% | audible fan rotation |
| 50% | audible fan rotation and choke chirping |
| 80% | audible fan rotation and choke chirping |
| 100% | strong fan noise and choke chirping |
| 110% | strong fan noise and choke chirping |
Efficiency and PFC
| Efficiency and Power Factor 230 VAC | ||
| Load | Efficiency | PFC |
| 5% | 69.58% | 0.862 |
| 10% | 77.98% | 0.924 |
| 20% | 84.63% | 0.948 |
| 50% | 87.17% | 0.959 |
| 80% | 85.93% | 0.965 |
| 100% | 85.86% | 0.967 |
| 110% | 85.32% | 0.968 |
| Efficiency and Power Factor 115 VAC | ||
| Load | Efficiency | PFC |
| 5% | 67.21% | 0.892 |
| 10% | 76.57% | 0.954 |
| 20% | 84.23% | 0.962 |
| 50% | 85.90% | 0.969 |
| 80% | 83.76% | 0.978 |
| 100% | 82.92% | 0.989 |
| 110% | 82.58% | 0.993 |
The +12V voltage regulation is acceptable, while the weaker ouputs start too high. Nevertheless, all of the voltages are well within the ATX specification. Moreover there is hardly any ripple or noise on the smaller outputs +5V and +3.3V. They're always under 20mV and there are no remarkable spikes or transients. There's definitely some nice work here. The power factor is satisfying as well, staying above 0.862. Especially during low load efficiency could be much higher but that's OK for an 80Plus Bronze PSU.
Originally published at https://www.anandtech.com/show/5674/rosewill-hive-550w (Wayback Machine).