XFX 1000W Pro Series 80 Plus Platinum
Voltage Regulation
| +3.3V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +1.88% (4mV) |
| 10% | +1.78% (6mV) |
| 20% | +0.61% (7mV) |
| 50% | +0.30% (11mV) |
| 80% | -0.03% (13mV) |
| 100% | -0.67% (14mV) |
| 110% | -0.91% (15mV) |
| Crossload +12V max. | +0.70% |
| Crossload +3.3V/+5V max. | -0.30% |
| +5V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +0.05% (7mV) |
| 10% | +0.04% (8mV) |
| 20% | +0.04% (10mV) |
| 50% | -0.60% (14mV) |
| 80% | -1.54% (16mV) |
| 100% | -1.70% (13mV) |
| 110% | -1.84% (17mV) |
| Crossload +12V max. | +0.28% |
| Crossload +3.3V/+5V max. | -0.28% |
| +12V Regulation (Worst Ouput)/Ripple and Noise (Worst Output) | |
| Load | Voltage |
| 5% | +1.12% (5mV) |
| 10% | +1.08% (6mV) |
| 20% | +0.98% (18mV) |
| 50% | +0.48% (16mV) |
| 80% | +-0.00% (21mV) |
| 100% | -0.23% (23mV) |
| 110% | -0.29% (25mV) |
| Crossload +12V max. | -0.17% |
| Crossload +3.3V/+5V max. | +0.22% |
Noise Levels
| Loudness (subjective) | |
| Load | Opinion |
| 5% | low fan noise |
| 10% | low fan noise |
| 20% | low fan noise |
| 50% | fan noise |
| 80% | strong fan noise |
| 100% | strong fan noise |
| 110% | strong fan noise |
Efficiency and PFC
| Efficiency (AC input minus DC output) and Power Factor | ||
| Load | Efficiency | PFC |
| 5% | 80.01% | 0.816 |
| 10% | 84.20% | 0.877 |
| 20% | 90.56% | 0.939 |
| 50% | 92.74% | 0.980 |
| 80% | 91.80% | 0.986 |
| 100% | 91.01% | 0.987 |
| 110% | 90.98% | 0.989 |
The +12V voltage regulation is tight, while the weaker +5V ouput drops to 1.84% below the optimal level. Nevertheless, all of the voltages are well within the ATX specification. Moreover there is hardly any ripple or noise on the outputs. They're always under 25mV and there are no remarkable spikes or transients. There's definitely some nice work here and the results are very close to what we measured on the Seasonic PSU.
With 80 Plus Platinum certification, we expected high efficiency and the XFX model delivers. Efficiency is always above 80% and 80 Plus Platinum is no problem for this design. Maximum efficiency comes at 50% load as always. Worst-case efficiency at low load (5%) is still 80%, so we really can't complain. With 92.74% XFX is only slightly lower than the 860W PSU from Seasonic--easily within the variance we're likely to see from either PSU.
The power factor is also satisfying, staying above 0.816. That might not be the best result for low load, but any high-end system requiring the XFX Pro Series should be running loads higher than that. During all loads the fan noise is acceptable if not optimal. We didn't hear any noise from the chokes. Of course the fan's RPM and the load rise equally, which is one reason why we can't criticise a strong fan noise at 80% load. Furthermore the features include two different modes for controlling the fan speed—the fan can be turned off through up to 40%, making the PSU inaudible (just like the Seasonic 860W).
Originally published at https://www.anandtech.com/show/5546/xfx-1000w-pro-series-80plus-platinum (Wayback Machine).