Antec Three Hundred Two: Stay Cool, Budget Enthusiasts
- Posted in
- Cases/Cooling/PSUs
- Antec
- mid-tower
Noise and Thermal Testing, Overclocked
Antec's Three Hundred Two put in a solid showing in our stock settings, but as you'll see, it's under the increased thermal load from our overclocked testbed that it really starts to come into its own. This is why enthusiasts on a budget will want to take note: long, long ago overclocking was about maximizing bang for your buck, and that's what Antec is aiming to do here.





It's very nearly a clean sweep for Antec. The low fan speed continues to do a good job of keeping thermals down and idle CPU and GPU temps are among the best we've seen. The only test where the Antec doesn't place quite as high on the charts is in SSD temperatures, but anything south of 40C is more than adequate.

Of course, that performance comes at a cost. While idle noise isn't that bad at the low fan setting, the high fan speed is among our biggest offenders. The Three Hundred Two is an excellent performer, but you'll pay for it in noise. This is where all the ventilation in the sides and front comes into play, as it lets cool air in and hot air out, but unfortunately it doesn't do much to mask the noise of our test build.
Note that we are well aware of the difficulties of using a "one size fits all" testbed, but the real takeaway here is relative performance. We'll likely update to a more mainstream testbed after the Ivy Bridge launch, but whatever we choose as our baseline, there will always be other ways we could have customized for better cooling and/or lower noise levels.
Originally published at https://www.anandtech.com/show/5462/antec-three-hundred-two-stay-cool-budget-enthusiasts (Wayback Machine).