NZXT HALE82 650W and 750W
Voltage Regulation
| +3.3V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +1.81% (4mV) |
| 10% | +1.52% (4mV) |
| 20% | +1.21% (6mV) |
| 50% | +0.61% (8mV) |
| 80% | +0.30% (10mV) |
| 100% | -0.30% (10mV) |
| 110% | -0.61% (11mV) |
| Crossload +12V max. | -0.30% |
| Crossload +3.3V/+5V max. | -0.30% |
| +5V Regulation/Ripple and Noise | |
| Load | Voltage |
| 5% | +0.40% (3mV) |
| 10% | +0.40% (7mV) |
| 20% | +0.20% (7mV) |
| 50% | -0.20% (8mV) |
| 80% | -0.40% (12mV) |
| 100% | -0.60% (13mV) |
| 110% | -0.80% (15mV) |
| Crossload +12V max. | +0.20% |
| Crossload +3.3V/+5V max. | +0.40% |
| +12V Regulation (Worst Rail)/Ripple and Noise (Worst Rail) | |
| Load | Voltage |
| 5% | +0.25% (10mV) |
| 10% | +0.25% (12mV) |
| 20% | +0.25% (14mV) |
| 50% | +0.08% (20mV) |
| 80% | -0.08% (22mV) |
| 100% | -1,25% (33mV) |
| 110% | -1,33% (35mV) |
| Crossload +12V max. | +0.17% |
| Crossload +3.3V/+5V max. | +0.59% |
Noise Levels
| Loudness | |
| Load | Opinion |
| 5% | low fan noise |
| 10% | low fan noise |
| 20% | low fan noise |
| 50% | fan noise / audible bearing |
| 80% | strong fan noise / audible bearing / electrical side noise |
| 100% | strong fan noise / audible bearing / electrical side noise |
| 110% | strong fan noise / audible bearing / electrical side noise |
Efficiency and PFC
| 115VAC. 60Hz | ||
| Load | Efficiency | PFC |
| 5% | 69.44% | 0.850 |
| 10% | 78.68% | 0.890 |
| 20% | 85.50% | 0.930 |
| 50% | 87.89% | 0.966 |
| 80% | 87.00% | 0.981 |
| 100% | 86.23% | 0.982 |
| 110% | 85.86% | 0.984 |
The ball bearing fan is clearly audible under high loads, but it's not unusually loud for a 650W power supply . However, at 80% load and above, an electronic noise can be heard from a short distance. This may be a problem with our test sample, but it's still undesirable even if the other performance metrics are good.
The efficiency is as high, which is what we expected from the layout. This PSU is very close to achieving 80 Plus Silver certification, and it has no problem meeting the 80 Plus Bronze requirements. However, the efficiency at lower loads (5% and 10%) drops below 80%, which makes the PSU less suitable for low power systems or systems that idle under ~50W.
During low loads the current runs relatively flat trough the large PFC choke. The result is a power factor below 0.900--phase shifting is very high. Under full load 0.982 PF can be achieved.
The highlight of the HALE82 series is its voltage regulation, ripple, and noise results. These are simply put superb for a middle class product! We would like to see such results more often, though not surprisingly the performance comes with a cost.
Originally published at https://www.anandtech.com/show/5277/nzxt-hale82-650w-750w (Wayback Machine).