Archive 1997–2024

Intel DX79SI Review: The Default X79?

System Benchmarks

USB Speed

For this benchmark, we run CrystalDiskMark to determine the ideal sequential read and write speeds for the USB port using our 64GB Patriot SuperSpeed USB 3.0 drive.  Then we transfer a set size of files from the SSD to the USB drive, and monitor the time taken to transfer.  The files transferred are a 1.52 GB set of 2867 files across 320 folders – 95% of these files are small typical website files, and the rest (90% of the size) are the videos used in the Sorenson Squeeze test. 

USB 2.0 Sequential Read Speeds

USB 2.0 Sequential Write Speeds

USB 2.0 Copy Time

Despite the less than great sequential speeds, the Intel is board still as good as, if not better than, the ASUS P9X79 Pro.

USB 3.0 Sequential Read Speeds

USB 3.0 Sequential Write Speeds

USB 3.0 Copy Time

On the other hand, USB 3.0 speeds were relatively disappointing compared to previous chipsets.

SATA Testing

We also use CrystalDiskMark for SATA port testing.  The operating system is installed on the Micron RealSSD C300, which is rated at 355 MB/s read and 215 MB/s write, and the sequential test is run at the 5 x 1000 MB level.  This test probes the efficiency of the data delivery system between the chipset and the drive, or in the case of additional SATA ports provided by a third party controller, the efficiency between the controller, the chipset and the drive.

SATA 6 Gbps Sequential Read Speeds

SATA 6 Gbps Sequential Write Speeds

SATA 3 Gbps Sequential Read Speeds

SATA 3 Gbps Sequential Write Speeds

The dichotomy of the SATA results is relatively strange - while in SATA 6 Gbps the DX79SI performs well in sequential testing, the SATA 3 Gbps results are relatively low compared to others.

DPC Latency

Deferred Procedure Call latency is a way in which Windows handles interrupt servicing.  In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority.  Critical interrupts will be handled as soon as possible, whereas lesser priority requests, such as audio, will be further down the line.  So if the audio device requires data, it will have to wait until the request is processed before the buffer is filled.  If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time, resulting in an empty audio buffer – this leads to characteristic audible pauses, pops and clicks.  Having a bigger buffer and correctly implemented system drivers obviously helps in this regard.  The DPC latency checker measures how much time is processing DPCs from driver invocation – the lower the value will result in better audio transfer at smaller buffer sizes.  Results are measured in microseconds and taken as the peak latency while cycling through a series of short HD videos - under 500 microseconds usually gets the green light, but the lower the better.

DPC Latency Maximum

Our previous testing on the ASUS P9X79 showed that on average the DPC Latency was fairly low (~30 microseconds), with the occasional spike in the triple digits.  On the other hand, the Intel DX79SI seemed to idle around double that of the ASUS board, with spikes into the 140-150s.

Originally published at https://www.anandtech.com/show/5123/intel-dx79si-review-the-default-x79 (Wayback Machine).